« previous next »
Pages: [1]   Go Down

Author Topic: New to reloading  (Read 415 times)

0 Members and 1 Guest are viewing this topic.

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
New to reloading
« on: July 08, 2005, 06:12:36 PM »
what is  some good powders to start with, more on accuracy than speed? Will be reloading, 357 mag and max, 223, 243, 25-06, 7mm-08, 308, and 260 Rem.........and 45-70.. :?
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
New to reloading
« Reply #1 on: July 08, 2005, 07:38:08 PM »
Logged

Offline Val

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 846
Powder Choices
« Reply #2 on: July 09, 2005, 08:13:02 AM »
IMR 4350 gives accurate loads in my 25-06 for 100 and 120 grain bullets, I also get excellent results in my 243 with IMR4350 with 100 grain projectiles. I use IMR 4064 with 70 grain bullets in the .243. Benchmark works well in my .223.
Logged
Hunting and fishing are not matters of life or death. They are much more important than that.

Offline Castaway

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
New to reloading
« Reply #3 on: July 09, 2005, 09:30:26 AM »
For your rifles you can't go wrong with IMR 4895.  Not sure how it works in a 25-06, but it fills the bill in all others you listed.  Rather going out and buying a dozen powders, I suggest you start with one powder and eliminate rifles that don't respond to it then go from there.
Logged

Offline TNrifleman

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 542
  • Gender: Male
New to reloading
« Reply #4 on: July 09, 2005, 11:25:22 AM »
I would recommend purchasing at least one, preferably two or more good reloading manuals and reading them. They provide solid information on dies, components, powders, primers, bullets, and general procedures and troubleshooting for those of us who enjoy loading our own ammo. Internet chatrooms are great fun and can provide some good advice, but please spend some time on materials from Nosler, Speer, Hornady, Lyman, Accurate Arms, and other manufactures who are well beyond reloading as an interesting hobby. Good luck with your loading and shooting. Oh, one more thing, keep hanging out here on Grabeard Outdoors!
Logged

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
New to reloading
« Reply #5 on: July 09, 2005, 12:12:50 PM »
Thanks guys for the help, have the reloading book that came with my Lee, Hornady. Plan on getting a Speer and ann some others. Can't beat Greybeard Forums! Been on it for over a years in the Handi and Thompson Encore Contender Forums. :D
Logged

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
New to reloading
« Reply #6 on: July 09, 2005, 02:04:39 PM »
IMR 4227 and Lil'gun work well in the .357s  As dose AA1680, H110, and others .38/.357 are very easy to tailor loads for, Did I mention I like .357s? :wink:
Logged
Badnews Bob
AE-2 USN retired

Offline McLernon

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1217
New to Reloading
« Reply #7 on: July 10, 2005, 12:49:49 PM »
For the .223 I use IMR 4895 for 55 gr. bullet, Hodgdon Benchmark and Winchester W748 for 40 gr bullet. They work very well. The Benchmark is temperature insensitive so it would be my first choice although it might be a bit fast for 55 gr. bullets.

McL
Logged
Pages: [1]   Go Up
« previous next »