Author Topic: 270 gr LBT 44 load data ? (Read 423 times)

EdinCT · « **on:** July 10, 2005, 05:02:03 PM »

I would like to load this bullet to about 1100 fps for use in a 44 bisley that I carry in Alaska while fishing. I can shoot this velocity very well and would rather hit them in the vitals at 1100 than on the fringe at 1350.
Any advise as to a load?

Thank You
Ed

spinafish · « **Reply #1 on:** July 11, 2005, 03:45:08 AM »

even though they don't list the 270 grainer on their site, Hodgdon should be of help. You might want to contact the bullet manufactuer, they usually have data as well.http://www.hodgdon.com/data/pistol/44remmag.php

Graybeard · « **Reply #2 on:** July 11, 2005, 03:56:47 AM »

That bullet is pretty similar to the Lyman 429640 that is now discontinued by Lyman. I load it with 22.5 grains of either W296 or H110 to about that velocity. I'm not 100% certain of the crimp groove location on the LBT as compared to the Lyman so am not sure if this load is right for it or not. But it's what I use.

EdinCT · « **Reply #3 on:** July 12, 2005, 03:48:57 PM »

Thank You for the info. I received two powders and loads with the bullets one was AA9 and the other was 296 at approx 20.5 grains. I didn't want to reduce the 296 load because I've been told not to reduce ball powders. It sounds like I may get what I want from 296.
I am headed for Prince of Wales Island Alaska for some fishing and black Bear hunting the first 9 days in Sept. so I need to work on a load for my 44 fishing gun!
Thanks Again,
Ed