Author Topic: Groups (Read 636 times)

oldmanTN · « **on:** August 20, 2005, 09:22:27 AM »

Ok all you true and devoted factory Encore barrel owners. Why would a barrel shoot three good shots and then the rest of the shots go someplace else. Everything is locked down (scope,rings etc.)? Got a friend who shoots a 7mm RM and he said his first three shots are less then a quarter of a inch @ a 100yds and then the next two are going 5 to 6 inches low.

iisabigone · « **Reply #1 on:** August 20, 2005, 09:48:15 AM »

oldman my 270 barrel will shoot high for a few shots after a good cleaning but on about the 4th or 5th shot it settles into a group that stays consistant.

I also got some verticle stringing with one brand of factory ammo.
iisabigone

iisabigone · « **Reply #2 on:** August 20, 2005, 09:50:49 AM »

oldman

It could also be barrel heating problems. I usually wait quite a while between shots when shooting for groups.
iisabigone

Redhawk1 · « **Reply #3 on:** August 20, 2005, 11:40:37 AM »

I would have to agree, a barrel heating problem will cause you rounds to go all over. Let the barrel cool down between groups.

Bim · « **Reply #4 on:** August 20, 2005, 02:47:35 PM »

First off do I sense a little negativity here?
Less than a 1/4 inch? That's great! So what does the 5-6" low shots group?
What kind of barrel is it bull, varmint?

oldmanTN · « **Reply #5 on:** August 21, 2005, 09:00:16 AM »

Its a full bullbarrel, the first couple of shots are ok but after that they go somewhere else.

Dave1 · « **Reply #6 on:** August 31, 2005, 01:19:15 AM »

The first shot out of a cold barrel is the one that "matters" and the one I care most about. :-)

Dave1