Author Topic: cracked stock on SKS (Read 334 times)

Fortney · « **on:** September 20, 2005, 02:00:22 PM »

My rifle has a narrow but not hairline crack on the top of the neck of the stock directly behind the receiver cover. The crack is about 1 1/4 inch long and parallels the grain.It extends into the inletting at the rear of the action about 1/4 inch from the surface of the stock. It has become more apparent the more cosmoline I remove.

Can someone offerr suggestion on repair? I planned to kep the stock finish original, but can refinish if necessary. TNX

F

1911crazy · « **Reply #1 on:** September 20, 2005, 02:06:13 PM »

You could use stainable wood filler then solar lux stain and it should blend it in.

Sx2 · « **Reply #2 on:** September 20, 2005, 03:42:31 PM »

My Garand has the same thing, it was pinned at some point and time at the armory

1911crazy · « **Reply #3 on:** September 21, 2005, 02:34:35 AM »

I have seen some military gun stocks repaired with using dowels and glue then sand them flush with the stock. I use gorrilla glue if the stock is clean and dry of oils.