Author Topic: Shooting the Model 12FV .308  (Read 967 times)

0 Members and 1 Guest are viewing this topic.

Offline mag41vance

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 618
Shooting the Model 12FV .308
« on: October 01, 2005, 02:12:35 PM »
I finally got to shoot a few rounds with my new 12FV today.
The set up is Stock .308 12FV with a 24x Sightron scope.

After a fouling shot, I shot a five shot group at 100yards which yielded a 1.40" group. Four shots measured .878" .
This was the first shooting I've done since I broke my wrist and elbow 8 weeks ago. I was somewhat apprehensive about the recoil on my wrist. But I survived and am looking forward to my next session at the bench.

The load was:
RP brass fire-formed
125gr Sierra Spitzer
45.5 gr IMR4320
WLR primers
COL: .005 off the lands.

I'm sure there is a more accurate load combination, but for a light bullet in the 1-10" rifling I suppose it's a good start.
no x now!

Offline mountainview

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 516
Shooting the Model 12FV .308
« Reply #1 on: October 02, 2005, 11:01:43 AM »
Mag, I think your rig will do even better once you are healed up and do some more load experimenting. My 12FV in 223 will group 1/2 inch routinely at 100 yards. It could probably do a lot better but accuracy is limited to an extent due to my on-going hand ailment.

Offline rickyp

  • Moderator
  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
Shooting the Model 12FV .308
« Reply #2 on: October 02, 2005, 01:23:47 PM »
my savage 10fple-2 loves the bulk reming 165 gr bullets