Author Topic: Muzzle Brake MFR  (Read 457 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim n Iowa

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 758
Muzzle Brake MFR
« on: October 12, 2005, 09:37:09 AM »
I am in search of the mfr of a couple of brakes I had installed some time ago. It was three letters like KDM or ADM or something. I am wanting  a screw on cap to protect the threads when the brake is removed. I am hopping the mfr can provide same. Local shop where the work was contracted long gone.
Thanks
Jim

Offline MT4XFore

  • Trade Count: (0)
  • Member
  • *
  • Posts: 87
Muzzle Brake MFR
« Reply #1 on: October 12, 2005, 10:48:01 AM »
I'm not positive, but I'll bet you are talking about KDF.  Try this site: http://gunresource.com/kdf-recoil-reducer.html  Hope that works for ya!

Jim
You''re only as old as you think you are.....I''m still waiting on puberty, AGAIN!! :eek:

Offline Jim n Iowa

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 758
Muzzle Brake MFR
« Reply #2 on: October 12, 2005, 11:28:20 AM »
Yes it was KDF, I will check with Brownells and see if they can help.
Thank you for your reply.
Jim

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Muzzle Brake MFR
« Reply #3 on: October 12, 2005, 06:00:21 PM »
Most brakes are standard thread sizes so a cap should be no problem. What do you have the brakes on and how do you like them?
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Jim n Iowa

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 758
Muzzle Brake MFR
« Reply #4 on: October 13, 2005, 04:33:50 AM »
I have one on a model 70 win in 7mm mag it seems a little to long of a barrel. The other is on a model 77 Ruger in 338. I like them fine for developing loads and testing them on the bench really tames the recoil. I was thinking getting a "lead sled" for the bench and retiring the brakes.
Jim

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Muzzle Brake MFR
« Reply #5 on: October 13, 2005, 04:52:00 AM »
KDF has threas sizes from 7/16x28 to 5/8x24. Depends on muzzle diameter and bore size. A cap would be a simple thing to make or have made if one's not readily available. Brownells handles the KDF line.
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Jim n Iowa

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 758
Muzzle Brake MFR
« Reply #6 on: October 13, 2005, 12:26:14 PM »
I talked to Brownells today and the tech said they (KDF) offer no caps in their line, but its a option when you order the brake. I will try and contact them. I am not wanting to spend an arm and leg. Shooting and hunting with the brakes is ok, my hearing is gone now so I use the Walker electronic muffs. The  lead sled appealed to me as working on loads for a 16" 44 mag Marlin and this little toy will beat you up on the bench.
Jim

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Muzzle Brake MFR
« Reply #7 on: October 13, 2005, 07:27:28 PM »
I've used cheater bags for years. Even a 30-30 has a cumulative effect. A good friend once rold me that while recoil didn't bother him, he could only stand so much fun! How do you like the GameEars in the hunting woods?
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."