« previous next »
Pages: [1]   Go Down

Author Topic: Sloppy T/C barrel chambers ?  (Read 850 times)

0 Members and 1 Guest are viewing this topic.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Sloppy T/C barrel chambers ?
« on: October 17, 2005, 03:48:40 AM »
I want to get a 23" .223 barrel for my Contender.
I have read that the chambers are sloppy and drilled off center.
Is this what you have found to be true.
Custom barrel is not an option, not in the budget.
Logged
Failure is not an option
Placer County, Calif.

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
Sloppy T/C barrel chambers ?
« Reply #1 on: October 17, 2005, 04:05:40 AM »
My 15" 223 shoots MOA at 100, had the barrel for  30 years though....
Logged

Offline Doc T

  • Trade Count: (15)
  • Contributor
  • ***
  • Posts: 416
Sloppy T/C barrel chambers ?
« Reply #2 on: October 17, 2005, 10:51:58 AM »
I had one of the 23" 223 barrels and it shot MOA with 50gr bullets.  I sold it though because I don't like the 23" bull barrel.  I like the 21" tapered barrels much better.
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Sloppy T/C barrel chambers ?
« Reply #3 on: October 17, 2005, 11:11:59 AM »
Although I really like the custom barrels and have several. The truth is very very few factory barrels ever really have anything wrong with them. Buy a carbine length barrel, shoot it, if you don't like it sell it off on ebay (you may loose a couple bucks) and buy a full up custom job. Expect to pay upwards of $375-400 for one tho.
Logged

Offline htrjv

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 137
Happy .223 Owner
« Reply #4 on: October 17, 2005, 01:56:57 PM »
Hi I purchased a new G2 rifle with a 23" .223 bull barrel about a year ago.  Finally got to sight it in this past week, and I must say I am completely satisfied with it.  Did I say this is my first T/C?  Even went out and purchased a .22 and 6.8 SPC 23" barrels to round out the arsenal.  Go for it, you can't go wrong.  T/C has been very good in their customer support, based upon the posts here, and on rimfirecentral.com.
Logged

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Sloppy T/C barrel chambers ?
« Reply #5 on: October 18, 2005, 07:46:45 AM »
I have factory 23" & 14" Contender barrels.  They will both easily acheive that magical sub MOA thing everybody wants.  That is using the cheap Winchester white box varmint loads or reloads.
Logged

Offline redbonet

  • Classified -- Banned
  • Trade Count: (4)
  • Member
  • *
  • Posts: 40
Sloppy T/C barrel chambers ?
« Reply #6 on: October 18, 2005, 04:00:25 PM »
I have 3  223 barrels an all of them shoot good .
If you buy an T C Barrel . an if they are an problem .call T C an they will fix it at no charge to you . .
Logged

Offline HOG

  • Trade Count: (0)
  • Member
  • *
  • Posts: 31
23" .223 BULL
« Reply #7 on: October 23, 2005, 05:32:03 PM »
I SHOOT 23" BULL FACTORY BARREL  FROM CONTENDER.  I HAVE A VX I LEUPOLD 3X9 ON IT.  IF I DO MY PART IT WILL SHOOT MOA AT 100 YDS. I USE 50g. HORNADY SPXP BULLETS ON GROUND SQUIRRELS AND YOTES.  I HAVE NO COMPLAINTS WITH THE SET UP.
Logged
Pages: [1]   Go Up
« previous next »