Author Topic: #2 is finally done.... (Read 1387 times)

justannie2 · « **on:** November 01, 2005, 03:48:44 AM »

Been working slow at making calls since I'm just learning. But here's my latest. It's a padauk wood with a strip of copperhead hide around the side, copper over glass. I named it my 'Copperhead Call' :lol:

stuffit · « **Reply #1 on:** November 02, 2005, 03:31:32 AM »

I've seen something similar with a slate surface but never copper. Do you have to have a special striker to get the sound right with that material?
:wink:
stuffit

justannie2 · « **Reply #2 on:** November 03, 2005, 02:43:28 AM »

I think it's ironwood that's supposed to be the best striker for a copper pot. Didn't have any though. So just tried it out with the variety of strikers I had. Sounded good to me.

varmit_master · « **Reply #3 on:** November 06, 2005, 02:07:02 PM »

Hi that is a sweet looking call. VM

Hunter'06FlKy · « **Reply #4 on:** January 22, 2006, 12:38:28 PM »

i would have to say that's one of the nicest calls i've ever seen. nice work.

justannie2 · « **Reply #5 on:** January 23, 2006, 06:33:55 PM »

Thanks

Got 17 calls heading to the post office in the next day or two.

varmit_master · « **Reply #6 on:** January 24, 2006, 05:43:07 PM »

Hi i thought i would be on your Pro Staff. I havent seen you on in a while. VM

justannie2 · « **Reply #7 on:** January 25, 2006, 01:44:57 AM »

Just been really busy here :-) If I ever get caught up (and figure out what a 'Pro Staff is) I might have one :lol:

varmit_master · « **Reply #8 on:** January 28, 2006, 09:30:00 PM »

OK a Pro Staff memeber. is you send me a call for free. I use it and call in a bunch of turkeys show every body how good the call is or caller i am. :wink: Tell them who made my great call and i am using her call over anybodys. And i am glad to be on her Pro staff She isnt paying me to use her calls i am doing it because it is a great call. Like H.S. Strut has a Pro Staff. They pay them guys to use there calls and plus give them a free truck too drive. VM

justannie2 · « **Reply #9 on:** January 28, 2006, 10:05:17 PM »

Hmmmm, oh, okay. Thought that was the general idea of it all.

Right now the call making is on hold here. Ended up having health problems due to the dust. So I need to move my lathe to a storage room.

varmit_master · « **Reply #10 on:** January 31, 2006, 08:41:11 PM »

I had to put all my hunting on hold. I had knee surgury on Jan 10th i fell 4 times that night with my walking sticks as my nephew calls them. And one of the times it hurt bad my foot. So i call the Dr. the next mor. and told him i though i broke a bone in my foot. He said just wait until you come in for your check up he said the hurting is coming from the surgury. Well went Monday for my check up and all this time my foot has been hurting. So he said let get a xray. So i waited for him to come back into the room and he said you was RIGHT you did have a broke bone ... You have 2 broke toe's So the leg i had surgury my foot has 2 broke toe's. He made me get a spe. shoe to wear and took me off work for another month. lol HOPE you are getting better. Cant wait to me on that Pro staff.VM :wink:

Hunter'06FlKy · « **Reply #11 on:** February 01, 2006, 08:35:47 AM »

well if we're starting a prostaff for calls that look this nice i would be willing to join.

justannie2 · « **Reply #12 on:** February 02, 2006, 04:52:37 AM »

If I ever get around to a 'Pro Staff' I'll keep you both in mind :wink:

varmit_master · « **Reply #13 on:** February 13, 2006, 07:37:08 PM »

Hi do you need my address to send that call to so i can be on that calling staff.... :wink: VM

justannie2 · « **Reply #14 on:** February 14, 2006, 03:57:35 AM »

LOL Here are the calls that went out before I had to close shop....

Kind of a blury picture :? Loooking to getting the new shop set up by the end of the month. Then got a dozen calls (at least) to catch up on :roll:

varmit_master · « **Reply #15 on:** March 07, 2006, 11:30:07 PM »

One of them would look great in my vest. And even sound better me using it lol :wink: VM

justannie2 · « **Reply #16 on:** March 08, 2006, 12:57:05 AM »

:lol: All of them went out. (talk about supporting the post office! :roll: )

My 'shop' is still down. I'm still waiting for parts for my dust collector. Eventually I'll get them, I hope :?

varmit_master · « **Reply #17 on:** March 13, 2006, 12:56:54 AM »

Hi justannie2 i have been looking in my mail box every day for one season is getting close. :wink: VM

justannie2 · « **Reply #18 on:** March 13, 2006, 03:10:08 AM »

My shop still isn't going yet :?

varmit_master · « **Reply #19 on:** March 24, 2006, 10:00:36 PM »

One of them calls could be for my birthday it is in MAY i will be an old 34 yrs old. PS would look great in my turkey vest. VM

justannie2 · « **Reply #20 on:** March 25, 2006, 03:10:21 AM »

Boy! You sure are persistant varmit_master! :-D

PM me your address, I'll see what I can come up with :roll: Still getting orders done up, but might get them caught up in awhile.

I'll be expecting to be hearing rave reviews eventually :wink:

backwoodsboy · « **Reply #21 on:** April 01, 2006, 05:12:40 PM »

wow thats incredible...can you direct me to a site or some books that can teach me how to get started in makin em? what do you cut your slate with? ive heard of people doing this before by mounting the slate on an old turtle shell, thought it was pretty neat, yours are real nice looking

-cory

justannie2 · « **Reply #22 on:** April 01, 2006, 09:08:46 PM »

Cory, if you do a online search using Google, or probably any other search engine, you'll find sites that'll give you some directions.

To make the pots, the easiest equipment to use is a lathe. But some do use a drill press. As for the slate, most buy it pre-cut from a quary in Pennsylvania.

I've seen a few of the turtle shell slates. They are really cool. Just make sure it's legal in your state to possess one.

varmit_master · « **Reply #23 on:** April 02, 2006, 08:27:08 PM »

Hi justannie2 PM you. Havnt been on in a week or so have had the flu. VM

justannie2 · « **Reply #24 on:** April 03, 2006, 02:07:23 AM »

Good to see you back varmit master lol Thought you might of given up ever getting a call :wink: