« previous next »
Pages: [1]   Go Down

Author Topic: 45/70 guide gun lever opening on recoil???  (Read 705 times)

0 Members and 1 Guest are viewing this topic.

Offline Bigboar

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 315
  • Gender: Male
45/70 guide gun lever opening on recoil???
« on: November 01, 2005, 08:15:00 AM »
I took some carefully reloaded rounds 405 & 420 hard cast and 47 grains of Varget.  At the shot the lever would drop out of the closed position.  No signs of high pressure, primers fine, cases look fine.  Is this normal?  This was the fist time I used the led sled for working up some rounds but I don't think that would cause that??

bigboar :?
Logged

Offline 45-70

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
45/70 guide gun lever opening on recoil???
« Reply #1 on: November 01, 2005, 09:45:25 AM »
Shoot it offhand and/or without the sled.  If it doesn't drop out you'll have your answer.  Could be the lever hitting your hand during recoil and/or a weak lever latch spring, or the latch itself is worn, etc.

  I had to take mine out, ream out the hole slightly (it had a burr), polish the latch face and reassemble.  Haven't had a problem since...

  Hope this helps...but it's most likely the lever hitting your middle finger during recoil just enough to kick out the lever.  Try changing your grip... :grin:
Logged
Hunting for me is the challenge of stalking up close with a great rifle, your own handloads and the skill to use them for a quick humane kill on worthy quarry.

Offline gohip2000

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
45/70 guide gun lever opening on recoil???
« Reply #2 on: November 13, 2005, 10:08:07 PM »
mine does that too when I shoot buffalo bore 430 gr cast ammo.  It doesn't spring open, but just opens past the locking possition.
Logged
Pages: [1]   Go Up
« previous next »