Author Topic: Forend washer? (Read 486 times)

dirtdobber47 · « **on:** November 03, 2005, 06:13:52 AM »

Heard ya'll talking about using a washer to get the barrel of the forend, what type of washer and where is the best place to put it? Thanks

quickdtoo · « **Reply #1 on:** November 03, 2005, 06:29:42 AM »

It's in the FAQ, with a pic, even!!! :wink:

Norseman112 · « **Reply #2 on:** November 03, 2005, 06:56:30 AM »

I would also try shooting your handi with and without the "O" ring.

Norse

dirtdobber47 · « **Reply #3 on:** November 03, 2005, 08:29:12 AM »

Can't find anything in FAQ, what am I doing wrong?

quickdtoo · « **Reply #4 on:** November 03, 2005, 08:37:03 AM »

Probably looking in the wrong FAQ, look at the sticky FAQ near the top of this list, here's a direct link to it, the O-ring post is about half way down the page...You should read all those stickys, there's a concentration of accumulated info in there that would take months to glean from the forum posts.

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?t=26264

dirtdobber47 · « **Reply #5 on:** November 03, 2005, 08:52:31 AM »

Thanks Quickdtoo, old brains work real slow. :lol:

quickdtoo · « **Reply #6 on:** November 03, 2005, 08:55:03 AM »

Yup, been there!!! :grin:

RemingtonMagnum · « **Reply #7 on:** November 03, 2005, 09:57:48 AM »

Thank you for putting the tag to this subject. I did the same thing and could not locate the information at all.

Don Jackson Remington Magnum