« previous next »
Pages: [1]   Go Down

Author Topic: Looking for .45 Colt load  (Read 456 times)

0 Members and 1 Guest are viewing this topic.

Offline Dustee Miller

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
Looking for .45 Colt load
« on: November 10, 2005, 07:59:17 AM »
I own a box of 185 gr. LSWC and I can't seem to find a light load for the .45 Colt using AA #5 powder.  If anybody can point me to a source for that load I'd appreciate it.  The AA website does not  have it.
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Looking for .45 Colt load
« Reply #1 on: November 10, 2005, 08:38:16 AM »
AA-5 From 9.2 grains to 12.0 grains
 CCI-300 Primer
Logged

Offline Dustee Miller

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
Looking for .45 Colt load
« Reply #2 on: November 10, 2005, 08:41:24 AM »
Thank you, I'll go with the 9.2, I think that's what the Accurate book said for the 200 gr. LSWC and it should do for the 185s as well.  There'll be some kids shooting this gun and that's the reason for the light bullet and powder load.
Logged

Offline Dustee Miller

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
Looking for .45 Colt load
« Reply #3 on: November 10, 2005, 10:28:32 AM »
Well, I made up fifty of them and then checked the book and it says 10.6 grains for a 200 gr LSWC!  SO, these are going to real powder puff loads if the bullet even clears the barrel!
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Looking for .45 Colt load
« Reply #4 on: November 12, 2005, 01:45:15 PM »
Although I do not have a load to offer you. I just want to say becareful of super light charges of fast burning powder in this and other such sized cases.

If you feel you must have a super light load use the bulkiest powder you can find and add a filler on top to help keep the powder near the primer. I have used corn meal, (Too heavy) Oat meal, (Makes you hungey) Super granex shotshell buffer.

If you invision a cross section of the 45 colt case with a bullet seated. Invision the powder inside, if held horizontal. Is the powder over the primer flash hole? If no, you need more powder, or a different recipe, as this is a recipe for detonation. Detonation is a very dangerous thing. It can destroy your gun and anything in close proxcimity.

Personally I say, if I need less recoil I shoot less gun. I stay away from these superlight loads! I value my gun and my hands and face too much to gamble.

Just FYI, I hope you never have this problem. I offer it for informational value.
Like someone said, to be for warned, is to be so armed.

 CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Dustee Miller

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
Looking for .45 Colt load
« Reply #5 on: November 12, 2005, 09:38:38 PM »
The 9.2 gr. load was indeed a real powder puff.  My future loads with all be 10.2 gr. minimum.
Logged
Pages: [1]   Go Up
« previous next »