Author Topic: www.smokelessmuzzleloading.com (Read 1078 times)

mk2217 · « **on:** November 11, 2005, 08:42:05 AM »

Anyone seen or tried one of these. www.smokelessmuzzleloading.com I was thinking of getting one but was first wondering if anyone has had any experiences with one either good or bad. What do you think about the 1 in 36 twist rate? Do you think it would shoot a light sabot round like a 215gr PR bullet ok? I have been watching this forum for some time now and there seems to be a lot of knowledgeable people on here. Any input either good or bad would be great.. Thanks...mk2217

Keith Lewis · « **Reply #1 on:** November 11, 2005, 05:10:18 PM »

Scan down to the "NEF Question" post. I asked the question and got an answer and some replys from at least one that has one of these. You might want to question him about the rifle. I am considering it pretty seriously myself.

mk2217 · « **Reply #2 on:** November 11, 2005, 05:32:51 PM »

Thanks.. I'll try to find the post...

Ricci Price · « **Reply #3 on:** November 15, 2005, 05:32:20 AM »

I built my barrel out of a Adams&Bennett replacement 45-70 barrel, it is 4140 chromoly steel, 1 in 22" twist rate, 26" long. I built a lug and welded it on to fit an H&R receiver. Breech plug is 5/8 fine thread with a nose on it simular to the one used in savage rifle. The SMI barrels that I have read about are all shooters. Check out "doug's message board" and look in the savage smokeless muzzleloader section for more info on the SMI barrels.

mk2217 · « **Reply #4 on:** November 15, 2005, 10:22:06 AM »

Thanks for the info on that site. They really seem to like the SMI . Maybe I'll have to give one a try...

S.S. · « **Reply #5 on:** November 30, 2005, 07:03:10 AM »

Belching Smoke is half the fun of muzzleloading to me!