Author Topic: front sight problems (Read 293 times)

bulldurham · « **on:** December 14, 2005, 04:56:17 PM »

well this is the second time i shot the 45-70 handi took it out the first time but didnt have a range finder so i didnt make any adjustments i noticed it was shooting high and left anywho i took it out today and i corrected the left part but i turned the sight all the way down and at 100 yards it is still 5" high give or take with remington 450 corelokts although its dead on at 200 yards i would like to adjust it down. i have decided to either build a new insert for the front sight(or if they make an after market i might go that route) or just change it out does anybody have any suggestions and would annybody happen to know what the diameter of the barrel is ? thanks in advance any advice would be helpfull

quickdtoo · « **Reply #1 on:** December 14, 2005, 05:16:50 PM »

Read the Firesight sticky! :wink:

bulldurham · « **Reply #2 on:** December 14, 2005, 05:40:49 PM »

thanks quick. man i tell you what i coulda almost swore that there wasnt anything in the sticky's fore i posted that :wink:

Stan in SC · « **Reply #3 on:** December 15, 2005, 03:53:50 AM »

One answer might be to go to the 300 grain bullet.Lighter bullets shoot lower than the bigger bullets.

bulldurham · « **Reply #4 on:** December 15, 2005, 02:12:36 PM »

thanks stan ill give that a try once i get set up for reloading. i live in a small town and theres not alot of selection of ammo here.