Author Topic: 308 Loads for High Power Silhouette  (Read 1412 times)

0 Members and 1 Guest are viewing this topic.

Offline alsmith

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
308 Loads for High Power Silhouette
« on: December 21, 2005, 03:40:31 AM »
Hi,

Just got a Remington 700 BDL, left hand .308 and I am interested in hearing from others what type of loads and bullets that they are using in this caliber for High Power Silhouette.

Have a good Christmas and Happy Holidays.

Al

Offline anthonyg

  • Trade Count: (0)
  • Member
  • *
  • Posts: 56
308 loading
« Reply #1 on: December 21, 2005, 05:25:46 PM »
I have had great accuracy with the 308. 168gr sierra's mk @2600FPS using R15 fed210M and good brass.IMR4895 4064 aa2520 are also great powder choice's however the R15 cronoed so constant with very low extreme spreads every time i tested it Good luck with your new rifle and have a Merry Christmas
                            Anthony G ....       RAMBUSTER40
rambuster 40

Offline RamSlammer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
308 Loads for High Power Silhouette
« Reply #2 on: December 24, 2005, 01:06:39 AM »
G'Day
          My favourite load for CPT is Lapua case, 42gr AR 2208 (varget in US),Sierra 155gr palma lit with a winchester standard primer. For rams I use lapua 185gr factory loads when I can get them or 40gr AR2208 with a 180 of some sort. But due to a few standing I'm going to 190mk to see how they go.
Juddy

Offline 1armoured

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 186
  • Gender: Male
308 Loads for High Power Silhouette
« Reply #3 on: January 18, 2006, 10:41:17 AM »
Hey Al,
I use a Sako 75 sporter .308 with 22" barrel, so don't use too slow a powder with the shorter barrel.

I use ADI's AR 2206, specially developed for the .308/7.62.
It's equivalents are BLC(2) and AA2230, and slightly faster than H335 and H4895,  and W748 and N135.

I would use Hodgdon's or IMR's 4895 as a substitute.

Having purchased the best cases that I could find, (Lapua), I then looked for the best value for money projectiles, for practice as well as match.

Sierra 155gr HPBT Palma Match fitted the profile.

You can buy them in bulk, and they're very accurate.

Sierra will help you determine bullet drop/ballistics etc at silhouette distances, if you ask. They're very helpful.

My load for c,p,t is 43.5gr ADI AR2206  to mnfrs OAL recommended,
with Federal match primers, for 2,750 fps.
(Shoots under a minute in the sporter)

I use the 175gr Sierra HPBT Match for Rams, in Federal Brass with Federal Match primers, mnfrs OAL,  and 42.0 grs of ADI AR2206 for 2,600 fps.

Different brass to easily identify them, although the Federal is softer and the primer pockets are prone to expand.

Hell, Juddy, you don't need to kill the Rams with 190grs, just to knock them over.
The Lapua 185gr factory is pretty slow in my shorter barrel, but I use them for practice, as they have been available here as surplus, probably from Military sniper stocks.
cheers,
Sean