« previous next »
Pages: [1]   Go Down

Author Topic: Buffalo ejector change?  (Read 5946 times)

0 Members and 3 Guests are viewing this topic.

Offline Little Rabbit

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Buffalo ejector change?
« on: January 03, 2006, 07:18:55 PM »
I read on a thread that the factory is going to start making the classic without the autoeject. Is the true? Does anyone have any dates?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Buffalo ejector change?
« Reply #1 on: January 03, 2006, 08:54:41 PM »
Welcome aboard!! :D  All NEF/H&R rifles will have a mechanical extractor as soon as they run out of the ejector underlugs. Most of the new rifles are coming with extractors now.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Buffalo ejector change?
« Reply #2 on: January 04, 2006, 02:47:58 AM »
If you currently have an ejector and want an extractor it's a simple fix, done in less than 15 minutes. Regretably you cannot go from extractor to ejector  :( . Check the FAQ or ask if you need the info....<><.... :grin:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Sweaty Bullitts

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Buffalo ejector change?
« Reply #3 on: January 05, 2006, 07:26:45 PM »
I just received my new BC today, and the ejector works very well, thank you!

Sweaty
Logged
NRA
SASS - California Rangers
Folsom Shooting Club

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Buffalo ejector change?
« Reply #4 on: January 06, 2006, 03:14:06 AM »
Good for you!!!....<><.... :grin:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline hpdrifter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 99
extractor
« Reply #5 on: January 14, 2006, 02:14:25 PM »
if you want an extractor, just fold up a note card about 6 layers deep by 1/8" wide and place it between the roll pin in the hole on the side of the mounting lug and the top of the hole.  It'll hold the ejector sear from engaging and will let it extract.  When you wanna go back to ejector, take paper out.
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Buffalo ejector change?
« Reply #6 on: January 14, 2006, 03:58:40 PM »
Great tip for a nice and easy temporary change, thanks..Any chance of getting this placed in the FAQ's or somewhere where the info won't get lost?....<><.... :grin:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Buffalo ejector change?
« Reply #7 on: January 14, 2006, 04:05:13 PM »
I was waiting for Fred to comment on it, need to know if it's gonna cause any damage. I might have ta try it to see how it works first before including it in the FAQ. I'd hate to have it break ejectors or somesuch.

Lost????? Now how in the world would that happen???? :roll:  :roll:  :roll:
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Fred M

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2362
    • Fred The Reloader and Wildcatter
Buffalo ejector change?
« Reply #8 on: January 14, 2006, 05:26:53 PM »
Tim
I don.t see any mechanical problems with that. Except you have to remove the forearm every time you change. That by itself I don't like.

Besides I am happy with the ejector and my manual notch extractor if a case gets stuck. I would not want an extractor. All my double shotguns have automatic ejectors, don't know why I would want an extractor besides they are sign of a cheap gun. Ouch :roll:

In my experience only worn and stretched brass seams to stick in a polished chamber and of course too hot a load. So at the range and shooting gophers I don't worry about a stuck case.

When I go hunting I use new brass and that wont stick. If I don't need a second shot my hand catches the empty. Sofar I have not needed a second shot. You all know the Handi is a one shot shooter ,ha :o
Logged
Fred M.
From Alberta Canada.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Buffalo ejector change?
« Reply #9 on: January 14, 2006, 06:05:52 PM »
I dunno if this is gonna stay a sticky, but for now it's there until we get stuff reorganized.

Thanks, Fred!!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Bear Rider

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 115
Buffalo ejector change?
« Reply #10 on: July 02, 2006, 06:48:15 PM »
Quote from: Fred M
Tim
don't know why I would want an extractor


Some classes of competition forbid ejectors.
Logged
Flintlock! Anything else is imitation.
Pages: [1]   Go Up
« previous next »