« previous next »
Pages: [1]   Go Down

Author Topic: Can I Ream My Own Hornet to K-Hornet?  (Read 376 times)

0 Members and 1 Guest are viewing this topic.

Offline coyotehunter223

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 120
  • Gender: Male
Can I Ream My Own Hornet to K-Hornet?
« on: January 12, 2006, 02:23:42 PM »
What's involved?
Logged

Offline knight0334

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 1138
  • Gender: Male
    • Pennsylvania Firearm Owners
Can I Ream My Own Hornet to K-Hornet?
« Reply #1 on: January 12, 2006, 02:26:04 PM »
Rent or buy a reamer, hand turn it in the present chamber(be sure to use cutting oil),  thoroughly clean chamber..

then fireform some standard Hornet cases to make K-Hornet cases.

easy as that...
Logged
RIP ~ Teeny: b.10/27/66 - d.07/03/07

Offline mitchell

  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 2067
  • Gender: Male
Can I Ream My Own Hornet to K-Hornet?
« Reply #2 on: January 12, 2006, 02:48:03 PM »
yup what he said. i think you'll love the khornet. good move.
Logged
curiosity killed the cat , but i was lead suspect for a while

Offline stuffit

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 303
K Hornet
« Reply #3 on: January 12, 2006, 04:35:37 PM »
We did the conversion (or rather a more talented friend of ours did) from .22 Hornet to K Hornet in a Handi and my old Savage 219.  They both turned out very well and shoot as accurately as ever.  I've learned a little about shooting .22 cast bullets in the fire forming process.  It's best to start with new brass, though I annealed  some old brass and didn't lose many cases in the process.  It's a fine and fun shooting caliber. We used 7.4 grs of 5744 behind a 46 gr gas checked cast bullet for fire forming and even got good accuracy with that load.  Happy K Hornet shooter here for sure.
stuffit
Logged
Everybody changes their minds sometimes but a fool and a mule.

Deceased
Pages: [1]   Go Up
« previous next »