Author Topic: instructions (Read 431 times)

colorado kid · « **on:** January 28, 2006, 03:33:04 AM »

How Is everybody doing.

I need some help. I bought a Ruger Mk2 22, Does many body out there have any instructions on how to take it apart. I have went to the Ruger web site and got no help I also called and still no help. Please help me if you can Thanks Colorado Kid :grin:

Simple Man · « **Reply #1 on:** January 28, 2006, 03:46:04 AM »

Here is the link to the ruger website area that has the instruction manuals that you can downlaod and view.

http://www.ruger.com/Firearms/SE-InstructManuals.html

Graybeard · « **Reply #2 on:** January 28, 2006, 04:08:01 AM »

Taking it apart ain't the problem. Getting it back together is. I've owned several and usually end up trading them off when the time comes I have to take them apart to clean. I've spent as much as 3 hours trying only to end up having someone else do it for me. Had a friend who claimed to be able to do it in less than five minutes. One of mine he took over an hour to get back together. That's the reason I gave up owning that particular handgun. They are nicely accurate guns and function fine but eventually you have to take them apart and clean them. No thanks, not for me.

Simple Man · « **Reply #3 on:** January 28, 2006, 04:15:23 AM »

Here is a nice read on tearing it down and putting it back together. This guy claims there is a well hidden secret to it that he will share with you.

http://www.recguns.com/Sources/IIIC2p2.html

I'll keep digging.

jro45 · « **Reply #4 on:** January 28, 2006, 04:54:32 AM »

CZman You will never get away from that Bear. LOL

I have never had a problem takeing it apart or putting it back together using the directions. But now I've done it so many times don't need the directions.

Simple Man · « **Reply #5 on:** January 28, 2006, 04:56:31 AM »

Quote from: jro45

CZman You will never get away from that Bear. LOL

:-D :-D :-D :-D

poncaguy · « **Reply #6 on:** January 28, 2006, 05:05:48 AM »

I have a Mark II that I have owned 30+ years and have never taken it apart to clean it. Never had a jam or misfire............

rockbilly · « **Reply #7 on:** January 28, 2006, 07:14:20 AM »

:shock: In most cases it is not necessary to tear a gun down completly in order to clean it. I usuall just remove the grips and magazzine, slide the action back and lock it, then soak the gun in a automotive parts cleaning solvent. It may be necessary to take a horse hair brush and work on it some, but soaking over night, then blowing it out with air will usually leave the gun near spotless. Be sure to put a good coat of oil on afterwards. :wink:

colorado kid · « **Reply #8 on:** January 29, 2006, 09:49:12 AM »

Hi :grin: Thanks everybody for the very useful information. colorado kid

Questor · « **Reply #9 on:** January 30, 2006, 02:07:03 AM »

You may not need to take it apart. Just keep the visible areas clean (like where bullets feed and are extracted) and don't worry about the rest unless theres a problem with functioning (for example a deteriorating trigger pull.)