« previous next »
Pages: [1]   Go Down

Author Topic: 250 grain Barnes bullets in 45/70 ????  (Read 760 times)

0 Members and 1 Guest are viewing this topic.

Offline craiginok

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
250 grain Barnes bullets in 45/70 ????
« on: February 01, 2006, 06:07:42 AM »
I picked up 2 boxes of these and can't find any load data for them.
My barnes manual doesn't list them.
I need data or will 300 data be ok???
I'm using a super 16"/45-70 contender.  thanks,craig.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43302
  • Gender: Male
250 grain Barnes bullets in 45/70 ????
« Reply #1 on: February 01, 2006, 07:11:25 AM »
The only online data that I've seen is for the 1895 and Ruger at Realguns.com and from what I've read, that would be too hot for the contender. The 45-70 Loadbook has 250gr XFN data at trapdoor levels...

http://www.midwayusa.com/rewriteaproduct/694314
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline boneguru

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 205
ask barnes
« Reply #2 on: February 05, 2006, 10:04:13 AM »
that would be a rocket if it will work, let us know please, R
Logged
SUA SPONTE

Offline boneguru

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 205
ask barnes
« Reply #3 on: February 05, 2006, 10:14:42 AM »
that would be a rocket if it will work, let us know please, R
Logged
SUA SPONTE

Offline boneguru

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 205
have the recommended loads from Barnes
« Reply #4 on: February 16, 2006, 06:27:58 AM »
email me and I will send the pdf file

250gr xfn imr4895 53 gr 2002fps   57max 2153 fps
R
Logged
SUA SPONTE

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
250 grain Barnes bullets in 45/70 ????
« Reply #5 on: February 21, 2006, 12:36:40 PM »
If you email Barnes they'll send you some data.
Logged
God, Family, and guns, in that order!

Offline RUM runner

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
BE CAREFUL!
« Reply #6 on: February 21, 2006, 05:05:05 PM »
If you're gonna use barnes bullets in a contender, be very careful of pressures.  Especially if it is a barnes X bullet.  According to the techs at T/C the contender should be kept at under 24000 cup.

John
Logged

Offline boneguru

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 205
good point about pressure
« Reply #7 on: February 21, 2006, 05:19:35 PM »
the data they gave me was for encore!!!
picked up one of the Katadhin carbines, wow is that fun, I highly encourage anyone thinkin bout gettin one to do so, R
Logged
SUA SPONTE
Pages: [1]   Go Up
« previous next »