Author Topic: NV serial No. (Read 491 times)

James B · « **on:** February 04, 2006, 04:30:29 PM »

I looked ata new Handi today with a NV starting serial. Anyone know when it was made. I am wondering if its the new twist as its a 223. I don't know if it had the new extractor or not. How can you tell?

dodd3 · « **Reply #1 on:** February 04, 2006, 05:04:29 PM »

i think started in 1999 but tim or mac will no for sur
bernie

quickdtoo · « **Reply #2 on:** February 04, 2006, 05:24:31 PM »

Hi James!! V would be a 2005, most likely a 1:12" twist, you can tell if it's an extractor if you can't press it in when the action is open, and extractor will extend slowly when the barrel is broke open, an ejector will pop out sudden like and can be pressed in against the spring. :wink:

Tim

James B · « **Reply #3 on:** February 04, 2006, 08:33:50 PM »

Thank ytou gentlemen. This one has the 24 inch barrel. I sure liked it.

knight0334 · « **Reply #4 on:** February 05, 2006, 04:13:32 AM »

Not to hi-jack the thread, but I'm guessing the 2006 models will be "NW"?

I too will be picking up a .223 soon. hoping for a 1:9" twist..

stimpylu32 · « **Reply #5 on:** February 05, 2006, 05:19:23 AM »

knight0334

The only way i know to get a 1in9 for sure is to get the flutted barrel they only come with one twist .

quickdtoo · « **Reply #6 on:** February 05, 2006, 05:39:30 AM »

A currrent production fluted will be 1:9", but anything made last year could still be a 1:12"....the only way to know for sure is check the twist rate if it was made in 2005.

http://www.graybeardoutdoors.com/phpbb2/viewtopic.php?p=512756&highlight=#512756

knight0334 · « **Reply #7 on:** February 05, 2006, 06:08:34 AM »

I'm starting to wonder how often I'll be shooting heavier .224 slugs and whether 1:9" will be as necessary. ...that or I'm getting really antsy and wanting to get my project rolling.

stimpylu32 · « **Reply #8 on:** February 05, 2006, 06:10:10 AM »

Thanks Tim , I was thinking that the flutted were only made in the 1:9 twist . :oops:

I just wish that they would make up their minds as to what they are going to make . :? :? :? :?

stimpylu32 · « **Reply #9 on:** February 05, 2006, 06:14:16 AM »

Sorry Knight for the mis-info , i know that some guys like the heavier bullets for deer and yotes . :oops: :oops:

quickdtoo · « **Reply #10 on:** February 05, 2006, 06:17:59 AM »

Well, it is only made in 1:9" right now(I hope!!), but when it was first released, it was 1:12". The email I got from them made it sound like that was the only way they were made, but that's not the case as Michael's post stated. They were originally 1:12", but sometime last year they switched, so it's possible for a 2005 made fluted .223 barrel to be either flavor. :?

Tim

quickdtoo · « **Reply #11 on:** February 05, 2006, 06:23:13 AM »

There are a couple good heavier bullets that have been reported to shoot great in the 1:12", the 63gr Sierra #1370 and the 64gr Winchester Power Point, so even if you get a 1:12", you have options. :wink:

Tim

James B · « **Reply #12 on:** February 05, 2006, 04:22:04 PM »

Thats good to know. About the heavier bullets I mean.