« previous next »
Pages: [1]   Go Down

Author Topic: still cleaning my M70=rust on a jeweled bolt  (Read 838 times)

0 Members and 1 Guest are viewing this topic.

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
still cleaning my M70=rust on a jeweled bolt
« on: February 05, 2006, 07:06:35 PM »
I got an old, but NIB, M70 WalMart special.  I got the Loctite cleaned out of the bolt lug area.  My problem now is rust on the bolt itself.  Is there a nonabrasive way to remove rust without removing the bluing on the bolt handle and safety?
Logged

Offline John Traveler1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
removing fine rust on bluing
« Reply #1 on: February 05, 2006, 09:24:17 PM »
All I can suggest is to use a mildly abrasive material that will NOT harm the blue.  Try a brass brush or some brass wool and oil.  Wipe and rub, and wipe off the rust residue (it is abrasive too).  If the rust is really fine, a few minutes should be enough to remove the redness without hurting the good blue.

HTH
John
Logged

Offline CEJ1895

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
still cleaning my M70=rust on a jeweled bol
« Reply #2 on: February 06, 2006, 03:04:03 AM »
bluebayou - You might also try some Flitz metal polish... CEJ
Logged
If I can't take my rifles with me, I don't want to go!

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
still cleaning my M70=rust on a jeweled bol
« Reply #3 on: February 06, 2006, 10:55:44 AM »
I use 0000 steel wool and WD40. Rubbing lightly with plenty of WD40 wipe often to check progress. This will remove some blue but the rust first.  Usually if the blue is damaged it was already damaged by the rust,, so it's OK.. Touch up any blue damage/wear with a cold blue. I much prefer Brownells OxphoBlue in the liquid..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
still cleaning my M70=rust on a jeweled bol
« Reply #4 on: February 06, 2006, 02:45:22 PM »
Dang, I didn't think about Flitz.  I have a tube by the fridge.  Will try that and the steel wool/ WD40.  Might have a brass bristle brush in the tool box.....My the jewelling looks really nice.  The rust isn't on any blued area.  My concern about the blueing was that I couldn't just dunk it in CLR or some other acidic stuff.  It is really fine pin-prick type rust, can't see fingerprints, but it is on opposing sides of the bolt so probably is.
Logged

Offline hunt127588

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 142
still cleaning my M70=rust on a jeweled bol
« Reply #5 on: February 06, 2006, 03:34:15 PM »
A brass bristle brush with some CLP worked for me. The CLP is penetrating oil so you shouldn't see the rust come back unless abused.
Logged

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
still cleaning my M70=rust on a jeweled bol
« Reply #6 on: February 09, 2006, 09:12:02 PM »
Used some Flitz on the bottom of bolt (when closed).  Mirror like shine, but it took out some of the jewelling.  Oh, well, at least no rust.  Will try the CLP on the other spot.  Why does CLP have to smell so bad.  Smells like spoiled milk or something.
Logged

Offline NONYA

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2223
  • Gender: Male
still cleaning my M70=rust on a jeweled bol
« Reply #7 on: February 09, 2006, 10:36:27 PM »
GET SOME VALVE CUTTER AND A PENCIL WITH AN ERASERR IN A DRILL AND REJEWEL IT! :wink:
Logged
If it aint fair chase its FOUL,and illegal in my state!
http://www.freewebs.com/lifealongthedge/index.htm
Pages: [1]   Go Up
« previous next »