« previous next »
Pages: [1]   Go Down

Author Topic: Herret dies?  (Read 654 times)

0 Members and 1 Guest are viewing this topic.

Offline T/C nimrod

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 213
Herret dies?
« on: March 24, 2003, 11:37:33 AM »
Do any manufacturers make neck sizing dies for the 30 Herret or 357 Herret? Or am I stuck with full length resizing?
Logged

Offline Paul H

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 203
Herret dies?
« Reply #1 on: March 24, 2003, 12:23:42 PM »
You could get some bushing neck sizing dies for the 30 or 35 BR, and simply use various bushings to size as you please.
Logged

Offline gtram

  • Trade Count: (2)
  • Member
  • *
  • Posts: 29
Herret dies?
« Reply #2 on: March 24, 2003, 12:26:12 PM »
Just back off your sizing die about the thickness of a nickle from the shell holder. This will keep you off of the shoulder and you'll be good to go.
Logged

Offline rickyp

  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
Herret dies?
« Reply #3 on: March 24, 2003, 02:23:22 PM »
you can get a neck sizer from redding. I was using a 30/30 neck sizing die and it worked well. hornady and rcbs will custom make a neck sizing die for you for about $20 or so
Logged

Offline captainkirk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 112
Neck dies
« Reply #4 on: March 25, 2003, 10:12:27 AM »
I just purchased the Hornady 30 cal short neck die for my 30 herrett and it works great.  Minimal lube and effort needed.  Not sure how many shots you can go before you have to full-length though.  Inexpensive, too, under 20 $
Logged
Phil 4:13   I can do all things through Christ who strengtheneth me.

Offline T/C nimrod

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 213
Herret dies?
« Reply #5 on: March 26, 2003, 01:50:30 AM »
captainkirk - you have PM (not to be confused with BM)
Logged

Offline Super14

  • Trade Count: (0)
  • Posts: 2
Lyman Dies
« Reply #6 on: March 28, 2003, 12:03:38 PM »
I have a set of lyman dies that i got when i purchased my used contender. The lyman dies that i have ( am not sure if this is original) are in a three die set. There is a fl die, ns die, and a seater. The neck sizer is nothing more than a 30 caliber rile plug sizer. I looked at lyman's site but they do not list this set any longer.


D
Logged
Pages: [1]   Go Up
« previous next »