« previous next »
Pages: [1]   Go Down

Author Topic: WHAT BARREL FITS MY 870?  (Read 917 times)

0 Members and 1 Guest are viewing this topic.

Offline coopershooter

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 563
WHAT BARREL FITS MY 870?
« on: March 21, 2006, 03:40:53 PM »
ITS A 2 3/4 INCH 12 GA BARREL, WILL THE 3 INCH BARRELS FIT? AND I CANT SHOOT 3 INCH SHELLS IN A 2 3/4 RECIEVER, RIGHT?
 THANKS!
Logged

Offline DAD

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 181
WHAT BARREL FITS MY 870?
« Reply #1 on: March 21, 2006, 04:56:25 PM »
Thats correct, you can only shoot what is marked on the barrel. If its not marked for 3" shells DONT USE THEM!
Logged

Offline tbmaker

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 189
WHAT BARREL FITS MY 870?
« Reply #2 on: March 21, 2006, 05:34:10 PM »
Either barrel will fit but you can only shoot what the receiver was originally set up for.
If it started as a 2 3/4 you can only shoot 2 3/4.
If the receiver is a magnum then the barrel will dictate which shells you can shoot.
I use a 2 3/4" barrel on my Rem 1100 to get it to cycle trap loads. They either have 2 gas holes or 1. But not an issue with 870s.
Logged

Offline corbanzo

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
WHAT BARREL FITS MY 870?
« Reply #3 on: March 30, 2006, 09:41:20 AM »
870 barrels are 870 barrels, and they will fit on any 870.  The round you can shoot is the minimum of the two *receiver and barrel* and if that minimum is 2.75, then only 2.75" shells, IF 3" then 2.75 and 3.  If both for 3.5, then you can shoot all sizes of rounds.
Logged
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline olywa

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 198
  • Gender: Male
WHAT BARREL FITS MY 870?
« Reply #4 on: May 19, 2006, 02:00:58 PM »
I've got an older 870 Wingmaster and I noticed that there is a shop, in Minnesota I believe, that advertises they can convert an 870 from 2 3/4" to 3". They are a Remington warranty repair shop if I'm not mistaken. I found out about them on the Remington web page.

I was thinking about getting a 3" barrel with a RemChoke and then sending my receiver off for this modification. At $65 it seems like a pretty good deal. Has anyone tried this?

The name of the outfit is Ahlmans and their web page is:

     http://www.ahlmans.com/
Logged
*******************************************
Courtesy is as much a mark of a gentleman as courage.
   -Theodore Roosevelt

Offline Paul Mohr

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
WHAT BARREL FITS MY 870?
« Reply #5 on: May 20, 2006, 04:49:31 AM »
What are you wanting to do with it? To be honest there is not a real huge advantage to shooting 3 inch shells. You can find many 2 3/4 inch shells with simular ballistics if you look around. Both in shot and slugs.

The length of the shell really doesn't mean much any more. The only advantage to a 3 inch shell is if you are hunting turkey or water fowl you will be able to get more shot in there, like a 2 oz. load. But you can get pretty close to that with some 2 3/4 inch rounds.

For instance fiocchi makes a pheasant load that will shoot 1 3/8 oz of shot at 1485 fps, and it's a 2 3/4 inch shell!

Ulness you are goose hunting or trying to shoot turkeys at longer ranges I would not bother with 3 inch or 3.5 inch magnum shells. There is SO much selection in the 2 3/4 inch offerings it will cover just about anything.

Paul
Logged
AKA Psyco Smurf

Offline olywa

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 198
  • Gender: Male
WHAT BARREL FITS MY 870?
« Reply #6 on: May 20, 2006, 06:38:42 AM »
I pretty much agree with you Paul. I want to use 3" for exactly the cases you cited, turkey and geese. I get by with my Skeet-choked 26" 2 3/4" barrel for 90% of my shooting, but I want to stretch the capabilities of my old 870 Wingmaster a little further instead of picking up another shotgun for those rare instances when I just need a little more oomph.

I think I'll give Ahlmans a call and ask exactly what's involved in that conversion.
Logged
*******************************************
Courtesy is as much a mark of a gentleman as courage.
   -Theodore Roosevelt

Offline Sx2

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 155
WHAT BARREL FITS MY 870?
« Reply #7 on: May 21, 2006, 03:12:41 AM »
If it's a legitimate conversion I'd consider it. When I put a 3" BBL on my 2 3/4" reciever I wondered what the difference was????? The reciever seemed to be the exact same size :? I have heard it's somehting internal not sure.

I would get hem to explain everything in detail they plan on doing to your gun.
Logged
Member:
IDDDDC
Illinois Diver Ducks Don't Dally Club

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
WHAT BARREL FITS MY 870?
« Reply #8 on: May 22, 2006, 11:35:53 AM »
I once compared the exploded parts list in the manual for a 2 3/4" 870 and a 3" 870.  The main difference is the ejector.  Their are a couple of other parts that are different but they all have to do with the ejection.  It is an easy conversion that other places have done over the years.
Logged

Offline Sx2

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 155
WHAT BARREL FITS MY 870?
« Reply #9 on: May 25, 2006, 04:35:49 PM »
Nice Bow PIC BTW Paul 8)

Logged
Member:
IDDDDC
Illinois Diver Ducks Don't Dally Club

Offline coopershooter

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 563
WHAT BARREL FITS MY 870?
« Reply #10 on: June 04, 2006, 04:03:41 PM »
it's going to be mostly a home defence gun, so i dont need three inch shells. i might use it for close up hog's or deer, but i dont think a hog can tell 2 3/4 from 3 inches!?
 i just wanted to know the mechanics of the barrels and recievers.
 thank you guy's!
Logged
Pages: [1]   Go Up
« previous next »