Author Topic: Group Test Ranges for HP Silhouette  (Read 844 times)

0 Members and 1 Guest are viewing this topic.

Offline Gringo Grizzly

  • Trade Count: (0)
  • Member
  • *
  • Posts: 43
Group Test Ranges for HP Silhouette
« on: March 25, 2003, 03:12:29 PM »
Since I'm doing alot of range work right now, and conditions sometimes make shooting groups at long range difficult, I'm wondering what test methods are employed by some of the more experienced shooters out there.

If conditions are great, I think we can learn most from shooting at the longest range possible, but if they're not - which is often the case in Pa/Md in the winter when many of us are testing new combinations -
I've found that MOST of the time good groups at 100 yards can translate down range IF the velocity is fairly high.

Does this mirror experiences of other seasoned shooters?

Gringo

Offline Mutt

  • Trade Count: (0)
  • Posts: 2
Testing
« Reply #1 on: March 27, 2003, 04:10:56 AM »
My .02 worth, or maybe less. What's available to you in distance would be a greater factor than conditions. If 500 meters is available test it out there, may be surprised. I'm limited to 300 so match time and before is when 400 to 500 gets checked. I spent many years pounding the 100 yard line, was asked by an "experienced" shooter why I tested at 100 when my first target was at 200? good question! set a couple of simple flags and see what the loads are doing in what you will assuredly compete in one day. Don't get the tiny groups? This isn't a tiny group game-this is stand and deliver in whatever nature conjures up. 200 line 1/2min or less,300line same has worked when it's working. weather will make above criteria difficult, does the same match day, but I know what to expect. If above can't be attained, I keep trying with loads to get "close enough", option "B" spend more $$. Nahh lets go shoot! I think ideally a rifle should group shots all yardages under the dot! rifles are expensive, I got a bigger dot! Have a great season!!