« previous next »
Pages: [1]   Go Down

Author Topic: worn out dies??  (Read 614 times)

0 Members and 1 Guest are viewing this topic.

Offline tvc15

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 185
  • Gender: Male
worn out dies??
« on: March 24, 2006, 11:42:12 AM »
Just paid $3.00 for some old rcbs dies in .243. Figured I could use them for parts at the least. Tried them out on some old brass and discovered the bullets will slide in the brass with a push of my fingers. I guess these are worn out. How many rounds must you load to "wear them out". ??? TVC15
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
worn out dies??
« Reply #1 on: March 24, 2006, 12:12:02 PM »
385,234
Logged

Offline beemanbeme

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2587
worn out dies??
« Reply #2 on: March 24, 2006, 05:26:37 PM »
Perhaps not.  Take the resizer ball off of the depriming stem and run a case thru.  See what it measures acrost the mouth of the case -- or measure the inside diameter of the mouth if you have that sort of calipers.  It could be that you need to buff off a couple of thousandths from the resizer ball.  Just put the ball back on the stem, chuck it into a drill motor and use very fine emery cloth or 0000# steel wool to shine it up real well.  
To cover all your bases, you might want to mike those bullets you're using.
I find it hard to imagine someone putting enough brass cases into a steel resizer to wear it out.
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18265
worn out dies??
« Reply #3 on: March 24, 2006, 11:09:55 PM »
i wore out a set of square deal 44 dies so it can be done.
Logged
blue lives matter

Offline DaveinOakwoodGA

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
worn out dies??
« Reply #4 on: March 25, 2006, 02:47:02 AM »
If they're RCBS dies, I'd send it back to RCBS and have RCBS check them out.  They come with a lifetime warranty that as far as I know, includes any and all owners.

Regards,

Dave
Logged
Dave In Flowery Branch, GA

"Son, if you wish your country to remain free, you must do what is necessary to keep it so."
James Elmer Dixson, USMC 1939-1945

Offline tvc15

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 185
  • Gender: Male
worn out dies??
« Reply #5 on: March 25, 2006, 04:30:20 AM »
I measured the ball it was .241, which I believe is about right. However the bullets measure .2425 at best.This was old range brass so I crimped them slightly out of round and ran them through the expander ball only. Now they are working well. The ones that are not perfect for the 85 grain fit very good  for some 100 grain that measure out a true .243. thanks for the advice. Looks like I might have got a deal.   TVC15
Logged

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
worn out dies??
« Reply #6 on: March 25, 2006, 07:19:16 AM »
Quote from: ricciardelli
385,234


Boy, you got jipped.  I got 385,385 out of mine!!

Steve   :D
Logged
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
worn out dies??
« Reply #7 on: March 25, 2006, 09:47:56 AM »
Quote from: Steve P
Quote from: ricciardelli
385,234


Boy, you got jipped.  I got 385,385 out of mine!!

Steve   :D


Maybe so, but I didn't lube my cases!
Logged

Offline gwindrider1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 446
worn out dies??
« Reply #8 on: March 25, 2006, 02:28:25 PM »
:-D  :-D  :-D  :-D  :-D !
Logged

Offline Glanceblamm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2814
worn out dies??
« Reply #9 on: March 25, 2006, 04:25:39 PM »
:)  :grin:  :grin:  :D
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
worn out dies??
« Reply #10 on: April 02, 2006, 08:31:38 AM »
Hardly be a good test of die wear .........using "old range brass" to determine die condition. Doubtful you have worn out dies....
Logged
Pages: [1]   Go Up
« previous next »