Author Topic: 25-06 Target Load (Read 586 times)

tlohern · « **on:** April 01, 2006, 01:07:15 AM »

I shoot a Ruger#1V 25-06.I've been trying to get an accurate load worked up for a Sierra HPBT 100gr Match bullet. I'm using IMR 4350 between 49 and 51grs and I only shoot targets,at 100yards.Any info out their?Thanks

Val · « **Reply #1 on:** April 03, 2006, 07:53:04 AM »

I'm getting very good accuracy with 51 grains of IMR 4350 and 100 grain Nosler Ballistic Tips. This load gives me a chronographed muzzle velocity of 3167 fps out of a 24" barrel.

longwalker · « **Reply #2 on:** April 05, 2006, 06:50:40 AM »

I hessitate to say Target loads because I am sure the Speer Bullets I use are not really target projectiles.

I load 56 grains of IMR 4831 with speer 10 Grain SPBT bullet. Good on paper deadly on Game.

longwalker

oso45-70 · « **Reply #3 on:** April 05, 2006, 03:33:44 PM »

Quote from: tlohern

I shoot a Ruger#1V 25-06.I've been trying to get an accurate load worked up for a Sierra HPBT 100gr Match bullet. I'm using IMR 4350 between 49 and 51grs and I only shoot targets,at 100yards.Any info out their?Thanks

tlohern

I have had pretty good luck with the sierra 100gr HPBT using IMR 4064 at about 3000 fps with loadings of 40.8 grs. Works for me, hope this helps

...........Joe........