Author Topic: 243 win. bolt face measurement  (Read 364 times)

0 Members and 1 Guest are viewing this topic.

Offline tootalloutdoors

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
243 win. bolt face measurement
« on: April 09, 2006, 03:28:54 AM »
I'm wondering what the bolt face measurement is for a 243. Where do you measure it at? Most importantly, what other cartridges are alike, as in for barrel/chamber changes with the same action.  Thanks a bunch...
  tootalloutdoors :D
bugling elk are proof that God exists!

TOS Warning given 4-13-05 Must accept e-mail from gbomgmt or stop asking for e-mail.

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
243 win. bolt face measurement
« Reply #1 on: April 09, 2006, 07:03:44 AM »
Don't have the numbers here but the 243 uses a standard bolt face. That means most of the standard cartridges(non-magnum) are the same size, 30-06, 308, 358, 260, 7x57, 8x57, etc...  The magnums obviously use a larger bolt face while the 222, 223, 17 Rem etc. use the small bolt face. The action sill also limit somewhat you cartridge choices. Short actions such as a 243 in the M700 will be put up in a short version of the m700 action and calibers such as the 270 would not work. Of course that's pretty much achedemic as almost any power level can be accessed in the short action. The 22-250 or 220 swift for varmits, the 243, 308 for general medium game and the 358 and new 338 Federal for larger animals..
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."