« previous next »
Pages: [1]   Go Down

Author Topic: confused about cleaning  (Read 316 times)

0 Members and 1 Guest are viewing this topic.

Offline DAD

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 181
confused about cleaning
« on: April 14, 2006, 06:51:00 PM »
I did a search and I'm even more confuised!  What or how and what should be used to clean the bore after shooting corrsive primers? Considering M48 and surplus ammo.
Logged

Offline Stan in SC

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 805
  • Gender: Male
Cleaning after shooting corrosive
« Reply #1 on: April 15, 2006, 01:20:33 AM »
The most accepted and probably the most convenient way to assure yourself that you have removed the hygroscopic salts residue after shooting corrosive ammunition is to swab the bore with Windex or a mixture of ammomia and water.I carry a squirt bottle with me to the range and after shooting I squirt a generous amount down the bore.
Then when I get home I clean normally.Never had a problem.

Stan
Logged
The more I listen,the more I hear....and vice versa.

45/70..it's almost a religion.

Offline Blammer

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 238
confused about cleaning
« Reply #2 on: April 16, 2006, 10:38:43 AM »
that is what I do, and I have also used water with a few drops of hand dishwashing soap in it.

Rinse liberally and swab out with patch and dry and you should be good to go.

the important thing is to "flood" the area in question so the "salts" from the corrosive primers is washed away or "neutralized"

Yesterday I just had plain drinking water on hand, washed bolt and brl off by "hosing' down and it was good to go till the next day when I cleaned it thouroughly.
Logged

Offline savageT

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1594
confused about cleaning
« Reply #3 on: April 16, 2006, 12:44:35 PM »
Blammer,
Question concerning corrosive salts:  Is it wise to disassemble and clean the bolt when cleaning the bore or do you feel that a swab across the bolt-face adequate?
Jim
Logged
savageT........Have you hugged a '99 lately?

Of all the things I've lost in my life, I miss my mind the most.

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
confused about cleaning
« Reply #4 on: April 17, 2006, 02:43:11 PM »
SavageT - Hey - how ya doin' buddy????  As you know it is eay to disassemble the bolt on a Mauser, be it a 96 Swede or 98.  I would, and have disassembled my bolts to make sure they don't corrode after using corrosive ammo.
Logged
Pages: [1]   Go Up
« previous next »