« previous next »
Pages: [1]   Go Down

Author Topic: safety  (Read 408 times)

0 Members and 1 Guest are viewing this topic.

Offline grousehunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 107
safety
« on: April 19, 2006, 05:20:07 PM »
My father has a 22 short, that has a pull safety at the back of the bolt! (you could call it cocking the rifle) when you slap the side of the gun it'll go off(making it unsafe) NO at present I do not know the brand name or much as I have not seen this rifle since I was about 15 yrs old (near 40 yrs) I know it is still in his closet, but would like to know if anybody has an Idea of what I am talking about and/or knows anything about this type of safety?
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
safety
« Reply #1 on: April 20, 2006, 12:29:09 PM »
Winchester made several rifles that used the cocking piece in the safety scheme. the M60m the M69(not the M69A) and others. The M67 used a sleeve that was rotated to hold back the striker. The M60's striker was pulled to the rear then turned to either put it on safe or remove the safety. The are great old rifles and can likely be fixed.. There were other makers such as Marlin that made actions that were pulled to the rear to cock them..some had safeties, some did not..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline corbanzo

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
safety
« Reply #2 on: April 21, 2006, 07:40:20 AM »
we have a stevens shotgun that will do that... cock it, smack the bolt in, boom!  little bit dangerous.
Logged
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."
Pages: [1]   Go Up
« previous next »