« previous next »
Pages: [1]   Go Down

Author Topic: Herters reloading dies  (Read 558 times)

0 Members and 1 Guest are viewing this topic.

Offline Preacherman

  • Trade Count: (31)
  • Contributor
  • ***
  • Posts: 352
  • Gender: Male
Herters reloading dies
« on: May 31, 2006, 12:07:38 PM »
I just acquired a set of Herters 270 FL dies on ebay for $ 7.00 .
anybody know any thing about them?
will they work in my lee press?
all info will be appreciated
preacherman
Logged
Acts10:13

Offline stuffit

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 303
Herter's dies
« Reply #1 on: May 31, 2006, 03:09:45 PM »
I happened up on a set of K Hornet dies.  They fit all three of my single stage presses, a Lee, a Lyman Spartan, and an RCBS "O" press.  They seem to be good dies and load good ammo.  Herter's stuff was pretty good, actually.  
 :wink:
stuffit
Logged
Everybody changes their minds sometimes but a fool and a mule.

Deceased

Offline Zcarp2

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 175
I like Herters
« Reply #2 on: June 01, 2006, 07:19:42 AM »
Was planning on comparing dimension, but just haven't done it.  I will buy them again.  Just make sure they weren't abused by a previous owner - some will have scratches.

30-30, 7.65x53 Argie, and 8mm Mauser.

Zcarp2
Logged
Zcarp2

"The things that will destroy America are prosperity-at-any price, peace-at-any-price, safety-first instead of duty first, the love of soft living and the get-rich-quick theory of life." - - - Theodore Roosevelt

Offline Zcarp2

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 175
I like Herters
« Reply #3 on: June 01, 2006, 07:31:02 AM »
Was planning on comparing dimension, but just haven't done it.  I will buy them again.  Just make sure they weren't abused by a previous owner - some will have scratches.

30-30, 7.65x53 Argie, and 8mm Mauser.

Zcarp2
Logged
Zcarp2

"The things that will destroy America are prosperity-at-any price, peace-at-any-price, safety-first instead of duty first, the love of soft living and the get-rich-quick theory of life." - - - Theodore Roosevelt

Offline Don Fischer

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1526
Herters reloading dies
« Reply #4 on: June 01, 2006, 12:24:39 PM »
I have four or five sets of Herters dies. They all work in my presses.
Logged
:wink: Even a blind squrrel find's an acorn sometime's![/quote]

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Herters reloading dies
« Reply #5 on: June 01, 2006, 01:55:32 PM »
I have a Herters press and my lee dies work in it.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline PaulS

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1120
Herters reloading dies
« Reply #6 on: June 01, 2006, 07:21:16 PM »
Back in the 50's and 60's Herter used to have a different thread diameter and pitch but they switched over to the standard 7/8 inch thread that "everyone" uses. So, unless you got a set of very old dies you will be fine.
Logged
PaulS

Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.
Pages: [1]   Go Up
« previous next »