Author Topic: What does everyone have in the pump rifle rack (Read 14702 times)

Rick Teal · « **Reply #30 on:** June 27, 2011, 11:54:10 AM »

Quote from: olafhardtB on June 27, 2011, 08:41:28 AM

One day I realized I don't like pumps so I got rid of all of mine. I have not missed them. I don't like them. Theres nothing wrong with them I just dont like them. I think that they are good looking, useful, practical guns, but I don't like them.

That's similar to the way I feel about bolts - to each his own I guess.

oneoldsap · « **Reply #31 on:** June 27, 2011, 02:59:54 PM »

Well thanks for sharing that with us . WGAS !!

oneoldsap · « **Reply #32 on:** June 27, 2011, 03:02:23 PM »

Good for you ! WGAS

snake eyes · « **Reply #33 on:** June 28, 2011, 04:24:02 PM »

760 in 06,308,243,35 rem
7600 in 06,35 whelen
7600 carbine in 06
obviously love my 30-06s!!!Have a few in bolt guns too!!

J'hawker · « **Reply #34 on:** June 29, 2011, 01:22:22 PM »

760 in 300 Savage.

336SC · « **Reply #35 on:** June 29, 2011, 03:37:38 PM »

Have just a few.
Model 141 in 35 Remington,
Model 760 in 358 Winchester (rechambered from 35 Remington)
Model 7600 35 Remington (22" barrel, matte finish, and composite stock)
Model 7600 300 Savage (beautiful wood on it)
Model 572 .22 RF
336SC

Slowhanddd · « **Reply #36 on:** June 30, 2011, 12:31:35 PM »

I have three.All 760's.30-06,308 and a 270.Like them all ,but my 270 is my go to gun.

JW/OK · « **Reply #37 on:** June 30, 2011, 01:19:57 PM »

Remington 760 in 30-06 and a Marlin 27-S in 25-20 for the light work.

jobyjob · « **Reply #38 on:** July 14, 2011, 07:23:11 AM »

7600
Walnut & blue
6mm Remington
like new
Woo-hoo...........

pumpgun · « **Reply #39 on:** July 14, 2011, 03:20:58 PM »

hmmm, going from memory here so may miss a few

7600's - 35 rem factory carbine, 35 whelen factory carbine, 7615 223 LE version
760's - 270, 308 rifles and 30/06 in carbine
141's - 2 35 rifles and 1 32 carbine
14's - 3 35 rifles, 1 35 carbine and 2 30 carbines

love my rem pumps.

zoner · « **Reply #40 on:** July 16, 2011, 03:22:12 AM »

just one.....760 30-06 1966-67 vintage. It's like new,squared and checkered forend. I had a trigger job done on it and installed a Leupold Vari-xII 2x7

Doug B. · « **Reply #41 on:** July 17, 2011, 02:19:23 AM »

Like Slowhanddd and pumpgun, I have the first run Rem model 760 carbine in .270 Win. Easy carry, accurate but LOUD! It has one of the loudest "cracks" of any firearm I've heard.

Spencer, Carey · « **Reply #42 on:** July 17, 2011, 06:30:06 AM »

I.M.I Timberwolves in .44, and .357 mag. Saving my pennies for a 760 in .35 Rem I found in a local pawn shop, and hoping that it stays there a little longer!

Missing the magazine though. Pretty sure I can find one at C.D.N.N. down TX. way.

336SC · « **Reply #43 on:** July 17, 2011, 02:53:06 PM »

Quote from: Spencer, Carey on July 17, 2011, 06:30:06 AM

I.M.I Timberwolves in .44, and .357 mag. Saving my pennies for a 760 in .35 Rem I found in a local pawn shop, and hoping that it stays there a little longer! Missing the magazine though. Pretty sure I can find one at C.D.N.N. down TX. way.

Any short action 760/7600 clip magazine will fit. Remington used to list them as caliber specific but not any more. Clip will read like this: fits: 308, 243, 6mm, 257 R, 35 Rem. Long actions will read: fits: 30-06, 35 Whelen, 270 Win etc. I use .308 Win clips
in my 760 .358 Win and my .35 Rem & .300 Savage 7600's.
336SC

Spencer, Carey · « **Reply #44 on:** July 17, 2011, 07:16:57 PM »

Thanx for the "heads up" on that 336SC!

336SC · « **Reply #45 on:** July 18, 2011, 08:00:50 AM »

Spencer, Carey, I have found that sometimes a Remington 760/7600 jams trying to chamber a round from the clip after firing the first
round. The fix is super easy and even a tool challanged guy like me can do it. If any 760/7600 does jam on the second shot just file a very little metal off the very forward front radius of the clip, both left and right side. Only do a couple of thousands at a time at your
range so you can keep trying it after filing. It allows the clip to seat deeper and "catch" the latch a little bit more firmly. So go slow and just a little bit at a time with your file. This trick has worked on every 760/7600 that did the second round jam thing. I fire every
new clip I buy to make sure it won't be a jammer. If it balks even a little bit, I file both front radius' just a wee bit and try it again. It
works, believe me!!!
336SC

Spencer, Carey · « **Reply #46 on:** July 18, 2011, 10:43:29 AM »

Will keep that in mind 336. My dad has a30 06 760 but hasnt shot it much so i'll pass along your advice to him too. Thanx man

Rick Teal · « **Reply #47 on:** July 26, 2011, 05:43:42 PM »

I recently acquired a Rem. 141 in .30 Rem. to add to the list I posted back in '03.

Sheriff · « **Reply #48 on:** July 30, 2011, 09:24:24 AM »

Remington
7600 35 whelen, 35 remington,
572 22 lr.
Winchester 275
22mag.
Springfield Timberwolf
44mag.

Sheriff · « **Reply #49 on:** July 30, 2011, 09:27:37 AM »

Oops, forgot about the Remington 7615 Camo in .223 in the back of the safe. I've never fired it...........

Dixiejack · « **Reply #50 on:** July 30, 2011, 10:38:02 AM »

I have a Remington 572 BDL Smoothbore, a 760 in .223 with a corn cob pump handle, and a Remington 870 with a cantilever rifled barrel in 20 ga. Hope the last one counts because the barrel is rifled. Looking for a 760 carbine in .270 Winchester. I had one, traded it off and have been looking to replace it.

whelen36 · « **Reply #51 on:** August 01, 2011, 10:47:44 AM »

3-7600's in
.257 roberts
.25-06 rem.
7MM-08

1- 760 in
.308 win.

1-7615 in
.223 rem.

NYH1 · « **Reply #52 on:** August 22, 2011, 03:24:36 PM »

I just had my dealer order me a 7600 30-06 Carbine this morning. On my way there I was going back and forth between a 750 Woodsmaster 308 Carbine or the 7600 30-06 Carbine. I had 7600 30-06 Carbine about ten or twelve years that I traded and have always regretted getting rid of it. It shot around an inch and a half with just about any ammo and around or just under an inch with it's favorite factory loads. It was surprisingly accurate. Hopefully the new one will be half the carbine my last one was! My next 7600 in going to be a 35 Whelen.

Oh yeah, it's going to wear an older Redfield Tracker 3-9x40mm Scope. The scopes been really good over the years and is pretty light. Can't wait to get this combo together and shoot it!

NYH1!

Edited to change 750 Woodsman to 750 Woodsmaster.

Ron/Pa. · « **Reply #53 on:** August 22, 2011, 04:09:20 PM »

Just settled on a load, Sierra 100 gr. Pro-Hunter in front of 42grs, of IMR 4350, for my 7600 Roberts. Shoots in a half inch at 50yds. Hope it does the trick on Pa. Whitetail this year?

NYH1 · « **Reply #54 on:** September 02, 2011, 01:06:11 PM »

I brought my 7600 carbine home today. Mounted my 3-9x40mm Redfield Tracker Scope. Gotta bore sight it and then find a good all purpose deer, hog and black bear round it'll like. I'm going to try some 165 gr. ammo This is going to be my main hunting rifle, 2 feet to 200 yards.

hunt-m-up · « **Reply #55 on:** September 02, 2011, 04:32:55 PM »

Hope you like the carbine, that would be my next purchase.
Love my 7600 synthetic in .270, points and cycles naturally for a guy who grew up hunting deer with a pump 12 gauge except the .270 tends to settle back down faster than the 12.

chefjeff · « **Reply #56 on:** September 02, 2011, 05:34:36 PM »

Rem.760 '06,rossi 62 .22, browning BPR .22 mag, mossberg 500 w/hastings cantilever rifled.

Cheesehead · « **Reply #57 on:** September 02, 2011, 05:44:18 PM »

I have many guns, but no pump rifle. I think I need one in 308.

Cheese

DLuke · « **Reply #58 on:** September 05, 2011, 04:52:07 PM »

Ive got a couple 7600's right now. They are identical 270's, right down to stock length and slings, with different sights on them. One is scoped with a VXIII 2.5-8x.....

....and one has a Leupold Deltapoint with a 3.5 MOA red dot....

wileynet · « **Reply #59 on:** September 05, 2011, 05:01:49 PM »

winchester model 61 octagon gallery rifle still has chain ring on the bbl