« previous next »
Pages: [1]   Go Down

Author Topic: Are 44 mag and 445 mag barrels interchangable?  (Read 800 times)

0 Members and 1 Guest are viewing this topic.

Offline dougk

  • Moderator
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1937
  • Driftwood TEXAS
Are 44 mag and 445 mag barrels interchangable?
« on: July 18, 2006, 09:19:01 AM »
I am looking at a 445 mag.   Will the barrels interchange with the 44 mag barrels and frame?
thanks
Doug
Logged

Offline Feldhege

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
  • Gender: Male
    • Universal Sight
Re: Are 44 mag and 445 mag barrels interchangable?
« Reply #1 on: July 18, 2006, 09:44:31 AM »
Yep. Except for the markings, they should be fine.

Logged
If your best was good enough today....
It won't be tomorrow.

Offline Travis Shuck

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: Are 44 mag and 445 mag barrels interchangable?
« Reply #2 on: July 18, 2006, 10:38:30 AM »
the ejector rod cut out in the 44 mag shroud is shorter than the one on the 445sm.  that is the only real difference.  So the 445 shroud will work on the 44, but unless you mill out the slot for the ejector rod in the 44 shroud it will not work on the 445.
Logged
"seeing then that all these things shall be disolved, what manner of persons ought ye to be in all holy conversation and godliness." 2Peter 3:11

Offline Feldhege

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
  • Gender: Male
    • Universal Sight
Re: Are 44 mag and 445 mag barrels interchangable?
« Reply #3 on: July 18, 2006, 10:53:02 AM »
Good catch Travis. I was only talking about the barrels. He is correct about that. I was thinking about the time I almost bought a 445 Barrel (and shroud) for my 44 Mag. Sorry for the confusion.

Logged
If your best was good enough today....
It won't be tomorrow.
Pages: [1]   Go Up
« previous next »