« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: .375 Ruger  (Read 9031 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike378

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
Re: .375 Ruger
« Reply #60 on: February 12, 2007, 02:44:33 AM »
Same here! I may have asked this before, but does anyone know how much case cap. this round has?

My understanding is the capacity is 6% greater than the 375 H&H
Logged

Offline howard s.

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: .375 Ruger
« Reply #61 on: March 11, 2007, 09:27:12 PM »
30 cal ruger
416 cal ruger

talk about being able to hunt any thing in the world.
Logged

Offline GaryVA

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: .375 Ruger
« Reply #62 on: March 15, 2007, 03:35:47 PM »
The "African" and the cartridge has a lot going for it.

GVA
Logged

Offline 358Win

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 191
Re: .375 Ruger
« Reply #63 on: March 17, 2007, 04:04:10 PM »
Well I'm still a bit confused.  Some articles and specs show a 0.522 rim and a 0.522 base.  Others show a 0.532 rim and a 0.532 base.  The later would seem to make better sense since all regular belted cases use that rim and belt diameter (0.532).

What I am pretty sure of is that it is not based on the 404 Jeffery which is a rebated rim the body is 0.555.

If any one can find real SAMII specs for this I'd really appreciate it.
Logged

Offline jim dab

  • Trade Count: (0)
  • Member
  • *
  • Posts: 78
  • Gender: Male
Re: .375 Ruger
« Reply #64 on: March 18, 2007, 03:50:09 PM »
.404 HDS Basic
0.5390 rim
0.5420 base
I quote "the demensions of the rim,base and length of this basic case are almost certain to be slightly different from the corresponding  MAXIMUM dimensions specified for any case you plan to form from this one. Don't let the normal variation of a few ten-thousandths of an inch -- even a few thousandths -- worry you."

This is out of Ken Howell's "design and forming CUSTOM CARTRIDGES for rifles and handguns"

Does this help. This new Ruger case has the same rim size as the 375 H&H with the base the same size as the belt of the H&H case.

Jim
Alberta
Logged

Offline Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2534
Re: .375 Ruger
« Reply #65 on: March 28, 2007, 05:48:11 PM »
Here are some pics.  African on top, Alaskan on bottom.


Logged
Coyote Hunter
NRA, GOA, DAD - and I VOTE!

Offline CapoWard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: .375 Ruger
« Reply #66 on: May 04, 2007, 02:33:25 PM »
Quote from: 358Win on March 17, 2007, 04:04:10 PM
Well I'm still a bit confused.  Some articles and specs show a 0.522 rim and a 0.522 base.  Others show a 0.532 rim and a 0.532 base.  The later would seem to make better sense since all regular belted cases use that rim and belt diameter (0.532).

What I am pretty sure of is that it is not based on the 404 Jeffery which is a rebated rim the body is 0.555.

If any one can find real SAMII specs for this I'd really appreciate it.
Here's my response from Hornaday regarding the 375 Ruger case specifications:

Mr. Ward,

SAAMI maximum specification for the rim diameter is .532.  Also, the maximum main body diameter at .200 from the head is .532.
 
For manufacturing specs, the body diameter at .200 is about .529 on an unfired case.  The rim diameter is usually .526-.530.
 
Regards,
 
Mitch Mittelstaedt
Hornady Mfg. Co.
Logged

Offline James B

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 944
Re: .375 Ruger
« Reply #67 on: May 13, 2007, 04:05:12 PM »
I read that the case holds 2-3 grains more than the 375 H&H.
Logged
shot placement is everything.
Pages: 1 2 [3]   Go Up
« previous next »