Author Topic: Big Bore muzzleloders  (Read 1808 times)

0 Members and 1 Guest are viewing this topic.

Offline KYBOY

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 275
  • Gender: Male
    • http://www.kentuckytrappers.com
Big Bore muzzleloders
« on: July 28, 2006, 01:53:59 PM »
Cabelas makes the kodiak express magnum in .72 caliber. I am looking for info on other manufacturers of large caliber muzzleloaders, .69, .75,.62 ect. Any help would be appreciated.
Love them Big Iron's

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Big Bore muzzleloders
« Reply #1 on: July 28, 2006, 03:27:33 PM »
Here's a couple sources to check out.

James A Gefroh specializes in big bore round ball hunting rifles, his email is jgefroh@aol.com phone is (970)377-9564

Pacific Rifle Co makes the Zephyr underhammer in .62 cal, their email is pacificrifle@aol.com phone is (503)852-6276

Tim

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline dodd3

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
Re: Big Bore muzzleloders
« Reply #2 on: July 29, 2006, 02:39:18 AM »
heres a site for ya they will build any thing you like ,very good prices to.
bernie :D
http://www.underhammers.com/
if its feral its in peril

Offline fffffg

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 290
  • Gender: Male
Re: Big Bore muzzleloders
« Reply #3 on: July 29, 2006, 05:26:10 PM »
      i have a chambers flintlock .62 cal rifle.. it shoots a 335 gr round ball at 1450 fps.  his web sight is at  http://www.flintlocks.com/  they come in kits but they can steer you to a builder..  it is top quality stuff. flintlocks are  tougher to handle(longer learning curve) than percussion,and big bores also take more experience to handle due to the long barrel time and more recoil..     parts for chambers guns are available, some parts are on waiting lists causing delivery problems as these guns are highly sought after... i had a hard time getting parts for my pedersolis  some parts are not available for the pedersolies becouse they are made in groups, and the groups parts dont match.. ... others like them...   if you want a gun for this hunting season it will most likely already be together..  it usually takes quite a few months to get parts, build and finish a gun..  then it can take many monthes to break in barrel, find loads/wipes for different weather conditions and sight in the gun..  dave
montana!, home of the wolf,  deer,mtn goats,sheep, mountain lions, elk, moose and griz...

Offline lostid

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 420
Re: Big Bore muzzleloders
« Reply #4 on: July 29, 2006, 05:32:47 PM »
Cabelas makes the kodiak express magnum in .72 caliber. I am looking for info on other manufactures',,,,,,,
i think you may be refering to the kodiak double express, offered by Cabelas. The double express is offered in several rifled calibers by Cabelas. I have a friend that owns a .58 cal. Kodiak express.
 If you would like info about his experiance and/or my personal observations of the rifled pedersoli double offered buy Cabelas, I can/will help ???
 flip side,,if all you want is "blanket" info,,I will refer you too the archives of this web site ;)
i'm a realist. i've not seen it all, but man ,,I've Been Around the block once or twice

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Re: Big Bore muzzleloders
« Reply #5 on: July 30, 2006, 01:27:10 PM »
Lostid,

Someday your going to shoot a quality rifle, really enjoy the fit and the accuracy plus the well made parts.  Then discover that it's a Pedersoli and have to hide it from your friends when they come over to see your new thunder stick.

C F
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline lostid

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 420
Re: Big Bore muzzleloders
« Reply #6 on: July 30, 2006, 02:28:29 PM »
Lostid,

Someday your going to shoot a quality rifle, really enjoy the fit and the accuracy plus the well made parts.  Then discover that it's a Pedersoli and have to hide it from your friends when they come over to see your new thunder stick.

C F
Crow feather?? is that you?? the very moderator of this site that hassen't been seen nor heard of for monthes??? Dang!! good to hear form ya!! I sure am glad that it took a post by me too "tickle your feather" enough ta post again!! ya ole skinner you!! hey feder??hows ron??hope he's well??i'mm guessin youv'e seen him from tyme ta tyme? sure is gud ta see olde friends! :D hee,hee,heeee,,,,
 I'm well thank you,,boy's gettin older,just learnin ta drive,,and shootin this year'legal at vous',,he's a might shy of compitition,,but does well in the woods(it's the pressure ya knoe?) best wishes too you and yours
i'm a realist. i've not seen it all, but man ,,I've Been Around the block once or twice

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Re: Big Bore muzzleloders
« Reply #7 on: July 30, 2006, 04:19:26 PM »
lostid,

I thank you sir, for your kind words.  I had a computer crash, then a medical problem in the family that took my mind, if not my time.  I am glad to be able to once again view these pages, but as a regular person who can snort fire if I want to.
God bless you and yours,

C F
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline dodd3

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
Re: Big Bore muzzleloders
« Reply #8 on: July 30, 2006, 11:58:46 PM »
welcome back crow_feather good to see you .
bernie :D
if its feral its in peril

Offline fffffg

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 290
  • Gender: Male
Re: Big Bore muzzleloders
« Reply #9 on: August 02, 2006, 03:37:46 PM »
 i stated earlier that you could re fit a chambers gun from right to left..  after thought on this for a while i rememberd that some/most of his guns have cast off.. that is the butt stock is not in line with the barrel.. becouse of this feature some of his guns would not be able to be switched from right handed to left handed.. sorry for the missinformation..  dave..
montana!, home of the wolf,  deer,mtn goats,sheep, mountain lions, elk, moose and griz...

Offline KING

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 632
Re: Big Bore muzzleloders
« Reply #10 on: August 02, 2006, 04:58:35 PM »
 ;DThe bigger the bore......the more fun to shoot.........................I really like my .62 and the .75.  Kinda eat a lot of powder but sure are fun when they go off..........stay safe.King
THE ONLY FEMALE THAT I TRUST IS A LABRADOR.......AND SHE DONT SNOORE,AND DONT COMPLAIN ABOUT MY COOKING...THE ONLY GODS THAT EXIST ARE THOSE THAT HAVE ONE IN THE CHAMBER,AND 19 IN THE MAG.......

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline rebel dunn

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
Re: Big Bore muzzleloders
« Reply #12 on: August 24, 2006, 06:08:01 PM »
I have a Renegade that I bought a couple years ago as a project rifle.It was a 54 caliber and the bore was gone so I ordered a Long Hammock barrel in 62 caliber . I also bought a Markwell Hawhen that was in pitiful shape and used the patchbox and butt plate from it on the renegade .All I need now is a mould or some 62 cal. bullets to test it out .I probably have more in the rifle than I would have in a custom made gun but ain't nobody else got one like it. ;D
Rebel