Author Topic: 7MM Mag. load help  (Read 603 times)

0 Members and 1 Guest are viewing this topic.

Offline Coalminer7

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 138
7MM Mag. load help
« on: August 01, 2006, 04:18:42 PM »
Need a good load for a 7 mag, using 175 gr. Sierra bullets.  Have tried IMR 4350, shot fair and IMR 7828, real erratic.
Anyone know any good loads?  Gun is a 700 Rem. ADL going to Northern Sash. for moose.

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
Re: 7MM Mag. load help
« Reply #1 on: August 01, 2006, 04:43:24 PM »
I have had good luck with Remington 175 grain CorLocks and 175 grain Hornaday bullets pushed by 78 grains of AA8700.  Both bullets were accurate and shot into the same small group at 100 yards. 
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline Jim n Iowa

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 758
Re: 7MM Mag. load help
« Reply #2 on: August 02, 2006, 06:38:55 AM »
I have used the hornady with IMR 4831 starting at 62 gr its a ok hunting load (2-3") at 100 off hand. The Sierra may be a better choice as its BT, which my rifle seems to prefer.
Jim

Offline Chuck White

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 681
Re: 7MM Mag. load help
« Reply #3 on: August 06, 2006, 04:57:56 AM »
I haven't used the Sierra bullet, but I have used the 175 grain Speer Grand Slam for moose when I was in Alaska!
My rifle is a Remington M-700 BDL, 7mm-Rem Mag!

The load that I used was 56.5 grains of IMR 4350!
I had pretty good accuracy, if I remember correctly, I could put 5 in a 2 inch circle at 100 yards!


Chuck White
USAF Retired, Life Member, NRA & NAHC
Don't matter what gun you use,
just get good with it!

Offline thumbcocker

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 160
Re: 7MM Mag. load help
« Reply #4 on: August 06, 2006, 05:29:50 AM »
Try rl-22 or H-1000.

Offline Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2534
Re: 7MM Mag. load help
« Reply #5 on: August 08, 2006, 06:19:25 PM »
160g North Fork, 71.5g H1000, Federal brass, CCI 250, COL 3.284"

3048fps, 4 shots into 1.2" at 100 yards with 3 of the 4 into 0.40".

Coyote Hunter
NRA, GOA, DAD - and I VOTE!

Offline rickt300

  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 2937
Re: 7MM Mag. load help
« Reply #6 on: August 09, 2006, 06:39:59 AM »
The one 7MM Rem. mag I owned would not shoot 175 grain bullets as well as other weights. My best 175 grain loading used the Speer 175 grain Mag Tip and H4831.
I have been identified as Anti-Federalist, I prefer Advocate for Anarchy.