Author Topic: Double Action Pistol Pictures (Read 108650 times)

Lawful Larry · « **Reply #30 on:** August 27, 2006, 10:30:53 AM »

Someone thought a picture of times gone past would be a nice change:

Just a little something I ahoot at Cowboy Action Shoots, side matches!

briarjumper12 · « **Reply #31 on:** August 30, 2006, 04:53:53 AM »

Here's 3 of mine wheelguns.

Lawful Larry · « **Reply #32 on:** August 30, 2006, 05:24:51 AM »

Found another old timer to share with the folks:

This is a french M1895 Lebel, 8mm. I have shot it on a few occasions. It is not a very comfortable gun to shoot as far as the grip is concerned. But then again nobody ever said the french were perfect.

Lawful Larry · « **Reply #33 on:** August 30, 2006, 05:29:08 AM »

Oh no! Another gun!!!

This little S&W model 10-5 is something I tripped over and had to bring it home. This one is a tack driver.

Lawful Larry · « **Reply #34 on:** August 30, 2006, 05:32:36 AM »

Okay this is the last one, for now.

This is my woods gun during hunting season here in Virginia. It is a Ruger Bisley Accusport .45 Colt. And yes, she is very accurate.

Dan Chamberlain · « **Reply #35 on:** August 31, 2006, 01:25:32 PM »

Hope this works.

1937 S&W model 1917.

Gun was trashed when I got it, now it's not.

Dan

GRIMJIM · « **Reply #36 on:** September 03, 2006, 05:08:40 AM »

lawful larry, barbwire grips? Too cool! Can I ask where you got them?

LAH · « **Reply #37 on:** September 03, 2006, 06:42:37 AM »

Nice Dan............Creeker

Lawful Larry · « **Reply #38 on:** September 05, 2006, 02:46:00 AM »

Quote from: GRIMJIM on September 03, 2006, 05:08:40 AM

lawful larry, barbwire grips? Too cool! Can I ask where you got them?

Check out Tom Barney at:

http://www.lasergraphic.net/home/

I have had many pieces done by him and am very happy with his work. This is another piece of his work that I had put on my Winchester 1886:

I also have a beautiful buffalo on my '74 Sharps, but don't have a picture of it though.

Lawful Larry · « **Reply #39 on:** September 05, 2006, 02:53:13 AM »

I also had some other work done by another fella. i can't remember his site. I don't think he does too much grip work any more.

His work was also done with a laser graphic setup.

briarpatch · « **Reply #40 on:** September 05, 2006, 06:52:16 AM »

Thank you Broom Rider for the pics. A wonderful collection of double action revolvers that will no doubt shoot as good as they look.
I would also bet you know how to use the carry gun.

zipperzap · « **Reply #41 on:** September 12, 2006, 07:28:43 PM »

Here's my 'brand new(est) Python Hunter find! It's in almost mint condition!;D

zipperzap · « **Reply #42 on:** September 12, 2006, 07:31:31 PM »

Here's my favorite tuned & worked Redhawk Hunter!

... and here's my major Alaskan protector, friend and companion!

S.B. · « **Reply #43 on:** October 03, 2006, 01:15:03 PM »

Quote from: Old Griz on August 26, 2006, 09:18:20 AM

Hey S.B., I really like the knife, too. Where'd ya get that?

Straight from Ramdall.

S.B. · « **Reply #44 on:** October 03, 2006, 01:18:45 PM »

Quote from: Broom Rider on August 26, 2006, 02:24:59 PM

Five foot fourteen inches..............or...........six foot two inches.
Has anyone noticed what is strange about my 617 yet? It's the only reason I bought it.

Looks like a ten shooter or are you talking about the halo around it?

stimpylu32 · « **Reply #45 on:** October 03, 2006, 04:00:16 PM »

Broom Rider

Here is one you don't have yet .

Its a mod 657 that came factory as a 41 Mag and has been rechambered by Gary Reeder to the 41GNR .

My 4" Tracker in 45LC

My daughters favorate , 3" S&W in 38 Spl.

Broom Rider · « **Reply #46 on:** October 04, 2006, 09:38:00 AM »

I bought the gun because the cylinder while it is a 10 shot has only 6 flutes. As you all know 'all' S&W 10 shot K frames have 10 flutes and ten chambers. It's one of my factory mistakes.

Troggy · « **Reply #47 on:** October 07, 2006, 09:32:45 AM »

All I have now, sold others. taurus Tracker 44mag. Hogue mono grip.

Poohgyrr · « **Reply #48 on:** October 09, 2006, 03:31:17 AM »

There are some nice wheelguns here.

This is an old family shooter, a five screw .357 with Fitz cherrywood grips. I found some Dade speedloaders online and had to buy them.

Cottonwood · « **Reply #49 on:** October 13, 2006, 01:35:33 AM »

Heres the family of three SRH in 44 mag, Taurus Tracker in 45 ACP and Taurus 605 in .357 mag

Gregory · « **Reply #50 on:** October 14, 2006, 10:28:01 AM »

Here's my Model 67

I'll have to get a picture of my 624

riddleofsteel · « **Reply #51 on:** October 22, 2006, 10:56:51 AM »

.454 Super Redhawk with 2x Posilock Burris in a Wegand mounts and rings

riddleofsteel · « **Reply #52 on:** October 22, 2006, 10:59:09 AM »

S&W Mountain gun in .45 Colt Segal coco bolo boot grips

riddleofsteel · « **Reply #53 on:** October 22, 2006, 11:02:26 AM »

S&W Lew Horton 10mm/.40 S&W

riddleofsteel · « **Reply #54 on:** October 22, 2006, 11:06:36 AM »

.45 Colt S$W Mountain gun with Eagle Sambar stag grips

riddleofsteel · « **Reply #55 on:** October 22, 2006, 11:17:27 AM »

riddleofsteel · « **Reply #56 on:** October 22, 2006, 11:21:03 AM »

riddleofsteel · « **Reply #57 on:** October 22, 2006, 11:27:21 AM »

Model 10 with Jay Scott black pearl grips

ratgunner · « **Reply #58 on:** November 12, 2006, 12:17:47 PM »

Broomrider,at 5'14" you wanna drag my deer out of the woods for me

please?Just kidding,nice collection you have.

a45gunslinger · « **Reply #59 on:** November 13, 2006, 06:31:56 PM »

Well, I no longer think I have alot of guns

Nice collections - Kevin
BTW- can someone tell me what the gun on the bottom right is ?? My fater-in-law gave it to me it is a S&W 32-20wcf . it was his grandfathers.