« previous next »
Pages: [1]   Go Down

Author Topic: T/C Encore in 480 Ruger  (Read 1477 times)

0 Members and 1 Guest are viewing this topic.

Offline jwhitf1

  • Trade Count: (0)
  • Posts: 1
T/C Encore in 480 Ruger
« on: December 05, 2002, 04:08:36 PM »
I just got a 12" 480 Ruger barrel for my Encore, after shooting several boxes of Factory ammo through it I decided I liked it well enough to reload.  Has anyone seen Encore specific loads for the 480 anywhere and does anyone else have a 480 barrel and if so what are your experiences with it.  

Jester
Logged

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26939
  • Gender: Male
T/C Encore in 480 Ruger
« Reply #1 on: December 06, 2002, 10:20:26 AM »
That's a mighty fat case and it is already operating at the same pressure levels as rounds like the .308 Win. or .30-06 even in the revolvers. I don't think trying to push it harder in the Encore would be a smart move. You'll pick up 200 or more fps most likely from the closed breech and longer barrel. This will in effect turn it into the equal of the .475 Linebaugh from a revolver.

GB
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline Spencer, Carey

  • Classified -- Banned
  • Trade Count: (2)
  • Avid Poster
  • *
  • Posts: 203
  • Gender: Male
Re: T/C Encore in 480 Ruger
« Reply #2 on: May 13, 2011, 04:22:04 PM »
Love my 12" barrel for mine! Can anyone give verified velocity gains for our pistols with closed breeches, and the xtra four inches of barrel with any or all bullet weights? Havent got to shoot farther than the 25 yds at the local range, so accuracy over distance info would also be appreciated.
Logged

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: T/C Encore in 480 Ruger
« Reply #3 on: May 13, 2011, 06:57:34 PM »
lyman third edition
275gr jacketed  H110 30gr 1578 fps / 31gr 1689 fps
325gr jacketed H110 26.1gr 1495 fps / 27gr 1561 fps
400gr jacketed H110 20.1gr 1225 fps /20.8 1250fps
this is out of a 12" barrel ENCORE
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline Spencer, Carey

  • Classified -- Banned
  • Trade Count: (2)
  • Avid Poster
  • *
  • Posts: 203
  • Gender: Male
Re: T/C Encore in 480 Ruger
« Reply #4 on: May 14, 2011, 05:43:17 AM »
Thanx Luckdog13. Shoot yours much, and if so what kind of accuracy are you able to achieve? Does any bullet weight seem to fly better in your gun? I like to lean toward the heavier bullets in the calibers over 44 because I got the larger calibers for bigger game than the east coast whitetails that I normaly shoot with my 44's. Also can you or anyone else give me a real comparison between the 400gr XTP and other heavy weight bullets from other REPUTABLE manufacturers. Jacketed or Cast. Ive only been able to find factory 400's from hornady where I am, and the ones in Midsouth, Natchez etc. are pretty pricey so any info would be appreciated before I drop $100 or so on like 40 rounds. Thanx again.
Logged

Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: T/C Encore in 480 Ruger
« Reply #5 on: May 14, 2011, 06:21:13 AM »
Quote from: Spencer, Carey on May 14, 2011, 05:43:17 AM
Thanx Luckdog13. Shoot yours much, and if so what kind of accuracy are you able to achieve? Does any bullet weight seem to fly better in your gun? I like to lean toward the heavier bullets in the calibers over 44 because I got the larger calibers for bigger game than the east coast whitetails that I normaly shoot with my 44's. Also can you or anyone else give me a real comparison between the 400gr XTP and other heavy weight bullets from other REPUTABLE manufacturers. Jacketed or Cast. Ive only been able to find factory 400's from hornady where I am, and the ones in Midsouth, Natchez etc. are pretty pricey so any info would be appreciated before I drop $100 or so on like 40 rounds. Thanx again.

sorry i dont own a 480 i looked in my handbook  ;D  i lean toward heaver bullets too
i shoot a encore in 454 with my 300gr hollow point cast or 330gr solid cast
Logged
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline Spencer, Carey

  • Classified -- Banned
  • Trade Count: (2)
  • Avid Poster
  • *
  • Posts: 203
  • Gender: Male
Re: T/C Encore in 480 Ruger
« Reply #6 on: May 14, 2011, 07:47:51 AM »
Thanx anyway luckydog13. Had a Super RedHawk breifly in .454. This Encore is a much more pleasant pistol to fire.
Logged
Pages: [1]   Go Up
« previous next »