Author Topic: Military surplus cannon bbls  (Read 1803 times)

0 Members and 2 Guests are viewing this topic.

Offline Frank46

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 707
Military surplus cannon bbls
« on: August 27, 2006, 08:27:10 PM »
I would like to locate a surplus rifled cannon bbl but so far have not had much luck. Old western scrounger's web site keeps coming up as not being able to find and cdss has either not received or ignored any e-mails that I have sent. Big sky surplus bbls look to be really rusty and for the money that they ask leave a lot to be desired. Was lookin at a 40mm bofors gun bbl that had be demilled and was covered in rust. Any suggestions and or sources? All would be welcome. Thanks, Frank

Offline Will Bison

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: Military surplus cannon bbls
« Reply #1 on: August 27, 2006, 08:48:30 PM »
Frank;

I have posted at least one link to surplus bbl's. The BIG problem is the twist rate, way too fast.

Bill

Offline guardsgunner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 421
Re: Military surplus cannon bbls
« Reply #2 on: August 28, 2006, 09:37:27 AM »
The twist on the 40mm's is around 1- 60". Just fine for what we are doing.

Offline rays89

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 266
Re: Military surplus cannon bbls
« Reply #3 on: August 28, 2006, 12:36:36 PM »
Try Sarco's They have alot of stuff like that. You should be able to find it on google

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Military surplus cannon bbls
« Reply #4 on: August 28, 2006, 05:21:24 PM »
What does it matter if the outside is rusty as long as the inside is not.  You are going to machine the out side.