Author Topic: .375 H&H brass???  (Read 1663 times)

0 Members and 4 Guests are viewing this topic.

Offline jphendren

  • Trade Count: (1)
  • Member
  • *
  • Posts: 86
.375 H&H brass???
« on: August 31, 2006, 03:04:33 PM »
Every place I have looked online as well as in town are out of stock.  What is the deal?  I thought this caliber was a standard and very popular.

Jared

Offline CyberSniper

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 261
Re: .375 H&H brass???
« Reply #1 on: August 31, 2006, 04:59:25 PM »
.375 H&H is not the only caliber that has become hard to find brass for.
.458 Win Mag same story.
Rumor is that resources are being diverted from commercial production in order
to take care of the military's demands for ammunition.
Also, copper prices have shot up, last I heard was nearly $4.00 a pound.
Copper is also used in the manufacture of brass cases...
The last catalog I got from "Cheaper Than Dirt" had a notice up front,
stating that there is a world wide ammunition shortage at this time also.
Add to all of that a seasonal increase in demand for ammo and loading components,
and it does not look too good in some respects.

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: .375 H&H brass???
« Reply #2 on: August 31, 2006, 05:38:33 PM »
Every place I have looked online as well as in town are out of stock.  What is the deal?  I thought this caliber was a standard and very popular.

Jared

Try here... http://www.brassmanbrass.com/inventory-001-1.html

They are currently out of stock but you can keep checking with them, also how many are you looking for, I may be able to help out. E-mail me at Surfish7 AT AOL.com
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: .375 H&H brass???
« Reply #3 on: September 01, 2006, 12:27:08 AM »
Jared,
  I have a friend that dosen't relaod and REALLY likes to shoot his 375 H&H mag rifles.  ::) SO I have collected QUITE a pile of his once fired 375H&H brass...Mostly Federal premium nickle plate, but all in all good selection of brands. I'm willing to help you out and part with a couple boxes.

 Shoot me an E-mail we can work it out

  CWLONGSHOT@ATT.NET

 If your prompt, I have to go the post office Sat amyway, I could get it mailed right out for ya...

 CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Re: .375 H&H brass???
« Reply #4 on: September 01, 2006, 03:01:32 AM »
Brass prices are higher now, but there is also the issue of seasonal availability with some cartridges. Companies don't make brass continuously during the year and they may only make one or two batches per year. I doubt that this is due to availability of raw materials.
Safety first

Offline jphendren

  • Trade Count: (1)
  • Member
  • *
  • Posts: 86
Re: .375 H&H brass???
« Reply #5 on: September 01, 2006, 05:02:09 AM »
Most other calibers don't seem to be in short supply, so it probably has more to do with seasonal availability of .375 brass.

cwlongshot; I will shoot you an e-mail.

Jared

Offline CyberSniper

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 261
Re: .375 H&H brass???
« Reply #6 on: September 01, 2006, 07:08:16 AM »
Most of this last year, ammo for the SKS / AKs has been hard to come by....
7.62 x 39 is a popular round even in the US nowadays.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Re: .375 H&H brass???
« Reply #7 on: September 01, 2006, 07:08:33 AM »
The most dramatic example of this phenomenon I've experienced is with .225 Winchester brass. Ever two or three years Winchester makes some, and it's all bought up quickly. .225 cases are popular with handgun hunters as the basis of hunting cartridges.
Safety first

Offline CyberSniper

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 261
Re: .375 H&H brass???
« Reply #8 on: September 01, 2006, 07:16:08 AM »
That's also a part of the problem.
Winchester did not make any .458 Win Mag brass this year either, as another example.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: .375 H&H brass???
« Reply #9 on: September 05, 2006, 11:21:47 AM »
jphendren ,
 My wife sent the two boxes to you today!!  You should see them by the end of the week!!

Sent email with remaining info.
 
 Happy to help a fellow shooter out,

 CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline jphendren

  • Trade Count: (1)
  • Member
  • *
  • Posts: 86
Re: .375 H&H brass???
« Reply #10 on: September 05, 2006, 12:04:48 PM »
CW,

Thanks for helping me out; I really appreciate it.

Jared

Offline spiker7mm

  • Trade Count: (0)
  • Posts: 4
Re: .375 H&H brass???
« Reply #11 on: September 28, 2006, 08:19:37 PM »
I just found a supplier that has 375 H&H brass after two weeks of checking local stores and the internet.

Buffalo Arms Co.

http://www.buffaloarms.com

Offline HL

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 404
Re: .375 H&H brass???
« Reply #12 on: September 29, 2006, 02:19:53 AM »
With copper prices going through the roof nowdays, I'm suprised that brass prices are not higher than they are.

Brass is a combination of copper and tin. Exact % differs between uses for brass.

Bronze is copper and nickel.

So, both of these metals, I expect to go up considerably until copper returns to a normal cost. I haven't noticed that much change in price for the brass I buy, but then again, I may just be buying their current stock that has not been affected by the increas of copper cost, yet.


Offline PaulS

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1120
Re: .375 H&H brass???
« Reply #13 on: October 04, 2006, 08:42:07 PM »
Brass is Copper and Zinc
Bronze is Copper and Tin
I am not sure what Copper and Nickel is - other than VERY expensive.

the alloy percentages do depend on the use

With copper prices going through the roof nowdays, I'm suprised that brass prices are not higher than they are.

Brass is a combination of copper and tin. Exact % differs between uses for brass.

Bronze is copper and nickel.

So, both of these metals, I expect to go up considerably until copper returns to a normal cost. I haven't noticed that much change in price for the brass I buy, but then again, I may just be buying their current stock that has not been affected by the increas of copper cost, yet.


PaulS

Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: .375 H&H brass???
« Reply #14 on: August 19, 2007, 04:24:01 PM »
Sorry to dredge up an old topic... ::)

 But I still have quite a supply of this brass if anyone else is looking...

 PM's would likely be best...

 CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
Re: .375 H&H brass???
« Reply #15 on: August 19, 2007, 05:41:41 PM »
Very interesting.  First off I have to commend shooters who are so eager to help a fellow shooter - a true brotherhood.

Second,  I read in a newspaper that some police departments are having trouble getting practice ammo or components for reloading.  Also read in Rifle Mag that some brass is getting real hard to find.  I haven't had trouble finding any sizes I need but I picked up a little more just in case. But it also makes me wonder how resourceful those police depts are - or are they constrained by purchasing policies or restrictions?

I hope the projectile and primer supply holds up. Glad I  have some moulds and several pounds of lead.

Seems like we went through this about 1993 - I'm currently using primers I hoarded from that year.  Guess we don't need to feed a panic either.



NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline gojoe

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Re: .375 H&H brass???
« Reply #16 on: September 29, 2010, 02:13:43 PM »
PM sent

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: .375 H&H brass???
« Reply #17 on: October 04, 2010, 12:56:20 AM »
Got it Joe!

 I don't have but a couple boxes of mixed brass yet. I haven't seen my 375 friend most of the summer, he has been away.

CK your PM box.  ;D

CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.