Author Topic: Polishing Brass  (Read 744 times)

0 Members and 1 Guest are viewing this topic.

Offline Preacherman

  • Trade Count: (31)
  • Contributor
  • ***
  • Posts: 352
  • Gender: Male
Polishing Brass
« on: September 05, 2006, 01:06:41 PM »
I saw on another site the other day a guy was using uncooked long grain white rice to polish brass before reloading. Tried it seems to work great. It's cheap enough to use a couple times and toss.
Any body else tried it?

Preacherman
Acts 10:13
Acts10:13

Offline PaulS

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1120
Re: Polishing Brass
« Reply #1 on: September 06, 2006, 01:20:27 AM »
Ground corn cob is cheaper and lasts longer. It shines up the cases too. I used rice just once and got tired of cleaning the rice kernals out of the flash holes. Like rice cob polishes nice but it doesn't clean cases as fast as walnut shells. I use the walnut shell media because it cleans fast and that is more important to me than a high polish. The ground shell mix is also cheap if you buy it at a feed and grain store rather than as "cleaning media" for cases. You buy this stuff in bulk putting it into your own sack 20 pounds at a time for a couple of dollars. Twenty pounds of rice is going to cost a bit more than that.
PaulS

Hodgdon, Lyman, Speer, Sierra, Hornady = reliable resources
so and so's pages on the internet = not reliable resources
Alway check loads you find on the internet against manuals.
NEVER exceed maximum listed loads.

Offline PA-Joe

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 980
Re: Polishing Brass
« Reply #2 on: September 06, 2006, 02:05:05 AM »
You can get corn and walnut hulls in various sizes in the rodent bedding area of most major pet stores. I use walnut to clean and corn to polish.

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Re: Polishing Brass
« Reply #3 on: September 06, 2006, 05:00:55 AM »
I think corn cob media must be available in bulk for pet supply purposes too. The guy who runs my favorite reloading shop buys it in bulk and sells it cheap. A bag that's big enough for my cleaner costs $3. It's not treated, but it works as well as the expensive reloading brand of corn cob media. I thought it would be tactless to ask him where he gets it, so I didn't ask. In any case I'm happy that he sells it and I'll keep buying it from him. I can clean about 10,000 45ACP cases with it before I need to pitch it, but replacing it after 5,000 is something I should do because the cases are pretty dingy after a lot of cleaning cycles.
Safety first

Offline handyman06

  • Trade Count: (0)
  • Member
  • *
  • Posts: 58
Re: Polishing Brass
« Reply #4 on: September 06, 2006, 12:15:31 PM »
i tried it, it didnt work nearly as fast as walnut for me.

Offline Don Fischer

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1526
Re: Polishing Brass
« Reply #5 on: September 06, 2006, 09:39:55 PM »
I use walnut for cleaning and treated corn for polishing. Mostly I just clean. I also have a 1" wood dowl with a 16 penny nail glued into it that I use to clean out primer pockets and flash holes when media does get stuck in there.
:wink: Even a blind squrrel find's an acorn sometime's![/quote]

Offline ihuntbucks

  • Trade Count: (12)
  • A Real Regular
  • ****
  • Posts: 944
  • Gender: Male
Re: Polishing Brass
« Reply #6 on: September 07, 2006, 03:33:11 PM »
Preach....don't toss it,cook it when you're thru 8).I use Lyman "tuffnut" only......Rick
"Traveling East" F&AM #261  RAM #105  R&SM #69  KT #23 "Live for nothing;die for something"

Offline wienranch

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
Re: Polishing Brass
« Reply #7 on: September 10, 2006, 09:54:45 AM »
I've been wondering about used coffee grounds.  Haven't tried it yet - can anyone think of any reason not to?

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
Re: Polishing Brass
« Reply #8 on: September 10, 2006, 04:09:42 PM »
I've tried the rice, I've tried the rodent litter from the pet store, and I've tried mixing the two together and adding a lot of Midway's polish. I've also found out that I was better off buying the corn cob media that is made for cleaning cases. ::)
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!

Offline DWTim

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 453
  • Gender: Male
Re: Polishing Brass
« Reply #9 on: September 10, 2006, 05:21:50 PM »
I've been wondering about used coffee grounds.  Haven't tried it yet - can anyone think of any reason not to?
I'd be afraid of the acids present in it. They're probably weakened after use, but it'd probably make the cases discolored.