Author Topic: If you could only have one Double Action Revolver that you currently dont own.  (Read 19859 times)

0 Members and 3 Guests are viewing this topic.

Offline HAMMERHEAD

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 508
  • Gender: Male
S&W 625 in .45 Colt because it could do any job that needs doing.
A Ruger Redhawk in the same caliber would be an acceptable substitute.
Send your donations to...

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
1. Ruger Redhawk in 357mag. S/S  5 1/2" barrel
2. Ruger Redhawk in 41mag.  S/S  5 1/2" barrel
3. Ruger Redhawk in 44mag. S/S  9 1/2" barrel
4. Ruger Super Black Hawk in 44mag  blue 10" barrel
5. Ruger Super Blackhawk in 45 long colt  7 1/2" barrel
6. Ruger Security Six in 357mag. S/S 6" barrel

If ruger offered a "super sized" super redhawk in 500 S&W i buy that too. But i want a 12" or 15" barrel barrel with a weight compisation under the barrel like the python has.

I may go after S&W's in 357 and in 41mag if i can't get the rugers i want.  I talked with ruger about manufacturing the redhawks in 357 and in 41 again but its always deaf ears. I'm fed up with waiting and hoping.

Offline krod47nw

  • GBO Supporter
  • Trade Count: (250)
  • Senior Member
  • *****
  • Posts: 1133
  • Gender: Male
S&W 357 Registered magnum with original stocks and all the paperwork.  It would be a 3 1/2" barrel (Like the one Hammerdown has).   8) 8) 8)

Kevin
The beauty of the Second Amendment is that it will not be needed until they try to take it.  Thomas Jefferson

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
No cut intended but i wonder the disadvantages of having a gun made years ago . The metal in those guns may be finished better ( a judgement call at best ) but the strength just can't match what we have today ?
If ya can see it ya can hit it !

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3636
No cut intended but i wonder the disadvantages of having a gun made years ago . The metal in those guns may be finished better ( a judgement call at best ) but the strength just can't match what we have today ?

  In the case of those old "N" frames, they were overbuilt to begin with, so it's a non-issue that metals may be better today.

  DM

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
It seems the new guns in SS don't wear or rust as much . They seem to resist flame cutting and errosion better also. Overbuilt is a great example a new 686 is smaller lighter and of better metal than an old mod.27 or 28 .
If ya can see it ya can hit it !

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3636
It seems the new guns in SS don't wear or rust as much . They seem to resist flame cutting and errosion better also. Overbuilt is a great example a new 686 is smaller lighter and of better metal than an old mod.27 or 28 .

  Well, i've only been shooting my old one for 35 years, (bought it used) so it's still too new to know if it's going to wear out.  If i live long enough to get it wore down a bit, i'll let ya know.

  DM

Offline dogngun

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 100
I'd look for an old S&W Model 13...I might look for one later this summer
for a present to myself for my 63rd birthday.
I have had several before and was dumb enough to sell them.
Very simple, nothing at all extra, great revolver.

mark

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Good luck with the 13 been looking here for a year or more , people hold on to then . Can't find a SS 65? either.
If ya can see it ya can hit it !

Offline camsdaddy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 147
  • Gender: Male
Mine would have to be a 3" SP101 or a 3" K frame.

Offline JeffDavis

  • GBO Supporter
  • Trade Count: (38)
  • Avid Poster
  • *****
  • Posts: 166
I would go with a 3" Model 36 or 60 with the full lug barrel and adjustable sights. I would have the action slicked up and the butt rounded with a Tyler T-Grip and a set of sambar stag grips from Ajax. Back it up with HKS speed loaders with Remington Golden Sabers and a couple of Bianchi Speed Strips and carry it in an floral El Paso Saddlery Tom Threepersons holster.

You know what? I deserve it. MAKE IT TWO OF EVERYTHING!!!!
REPUBLICAN: We work so you don't have to.
A friend in need is a pest.

Offline crystal river charlie

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 13
  • Gender: Male
Ruger  GP100-5"  357mag

Charlie

Offline Bigeasy

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1986
  • Gender: Male
Always wanted one of those Colt .44 mag D/A's (forgot the model name).  Expensive though, if you can find one.  The one I looked at years ago reminded me of a Python on steroids.

Larry
Personal opinion is a good thing, and everyone is entitled to one.  The hard part is separating informed opinion from someone who is just blowing hot air....

Offline gstewart44

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1645
  • Gender: Male
Always wanted one of those Colt .44 mag D/A's (forgot the model name).  Expensive though, if you can find one.  The one I looked at years ago reminded me of a Python on steroids.

Larry
Anaconda????
I'm just tryin' to keep everything in balance, Woodrow. You do more work than you got to, so it's my obligation to do less. (Gus McCrae)

Offline Bigeasy

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1986
  • Gender: Male
Always wanted one of those Colt .44 mag D/A's (forgot the model name).  Expensive though, if you can find one.  The one I looked at years ago reminded me of a Python on steroids.

Larry
Anaconda????


Thats it.  I already have 9 .44 mag revolvers, but maybe one more... ;D
Personal opinion is a good thing, and everyone is entitled to one.  The hard part is separating informed opinion from someone who is just blowing hot air....

Offline petepaaz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
    These "only one gun" choices are frustrating to me.....I tend to think in Survival mode and that a 2-gun choice makes more sense.....something for bigger 2 and 4 legged critters and something for small game.  In light of that I would probably choose a S&W 625 in .45ACP (I'm a big 1911 fan and have lots of that ammo) and a S&W 617 in .22LR.  The 625 could be loaded hot enough to handle most big game under 50yds (especially w/plus P loads) w/o excessive muzzle blast and recoil for faster follow-up shots; and the 617 would provide for cheap and light weight ammo to take the myriad of small game available.

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Re: If you could only have one Double Action Revolver that you currently dont own.
« Reply #106 on: September 22, 2010, 05:15:34 PM »
look up the Manurin, I bet it'll change some people's answers!

Offline International harvester

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: If you could only have one Double Action Revolver that you currently dont own.
« Reply #107 on: September 26, 2010, 04:42:34 AM »
Colt Python, bright stainless steel with 4 inch barrel and ivory stocks.

Offline Airsporter

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 893
  • Gender: Male
Good luck with the 13 been looking here for a year or more , people hold on to then . Can't find a SS 65? either.

Plenty on www.gunbroker.com

Have to add shipping and dealer transfer fee.  And, in my case, a state fee.

Prices are a bit all over the place, but I just bought a nice 65-3 4" off gunbroker for $310.  Crazy thing is I find many stainless M65's for same price or less than the blued M13 version!   ::)

My final cost in my case, with shipping/transfer/state fee, = $365  A bargain compared to price of a new K-frame!

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Good luck with the 13 been looking here for a year or more , people hold on to then . Can't find a SS 65? either.

Plenty on www.gunbroker.com

Have to add shipping and dealer transfer fee.  And, in my case, a state fee.

Prices are a bit all over the place, but I just bought a nice 65-3 4" off gunbroker for $310.  Crazy thing is I find many stainless M65's for same price or less than the blued M13 version!   ::)

My final cost in my case, with shipping/transfer/state fee, = $365  A bargain compared to price of a new K-frame!

they  don't make them any more  any way
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
Wheel guns wearout at the lever were it pushes / rotates the cylinder this can effect the timing we need to grease the rear of the cylinder and the lever too so the wear won't happen.

Offline Mohawk

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1958
Re: If you could only have one Double Action Revolver that you currently dont ow
« Reply #111 on: November 28, 2010, 07:16:07 AM »
S&W 25-5 "4 in nickel.

Offline Rutin2tin

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 141
  • Gender: Male
  • "No Gnuws is good Gnuws"~ Gary Gnu
Probably an original S&W "Registered Magnum" with a 5-1/2" barrel, in the original box with papers, etc.

For those who are not familiar with that piece, it's the first version of the .357 magnum (N sized frame),
custom built by S&W, pioneered by Colonel Daniel Baird Wesson and Phil Sharpe back around 1935.

The Registered Magnum eventually evolved into the Model 27.


It is.....what it is...

Offline spartacus1239

  • GBO Supporter
  • Trade Count: (44)
  • A Real Regular
  • *****
  • Posts: 505
  • Gender: Male
    • Just pics
S&W 36 non dash.  which I will own by Friday!
My FFL holder requires any firearms to be shipped to them via another FFL holder.  So, If I make an offer on a firearm please let me know if this is capable of being done from the start.  Please do NOT mark an item "SPF" to me until we "both" are happy with and in agreement on shipping, funds and the transaction in general.   Thanks

Massive music geek, have a LOT of different headphones and headphone amps.

Offline boatboy

  • GBO Supporter
  • Trade Count: (92)
  • A Real Regular
  • *****
  • Posts: 516
I am quite surprised that there is not more of my NON creative answer

I will have but either have not found or couldnt afford at the time

a close to prefect
6in Python Nickle with box and papers etc

I have a few snake guns but I dont have a Python when I do it will be the right (in my opinion) one

Hank
In the land of the blind the one eyed man is King

Say what you want, pick on him. but Ringo is still a Beatle

Offline alacharger

  • Trade Count: (5)
  • Member
  • *
  • Posts: 90
The key phrase to me is "that you currently don't own".  I won't be without a DA revolver....I currently have at least a dozen.

The one I'd like to have but has continued to elude me is a S&W Model 610 4". 
Approach every man with a smile on your face and homicide in your heart. 

D.A. "Jelly" Bryce

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
No cut intended but i wonder the disadvantages of having a gun made years ago . The metal in those guns may be finished better ( a judgement call at best ) but the strength just can't match what we have today ?

  In the case of those old "N" frames, they were overbuilt to begin with, so it's a non-issue that metals may be better today.

  DM
Not so sure about that as bullets were all lead back in the day.
If ya can see it ya can hit it !

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
I had one of the 610 , it seemed to lose alot of power with the cyl. gap vs. an auto. For me I had said a Colt Python but after seeing the S&W 627 -5 i have changed my mind and like the 610 it can use moon clips .
If ya can see it ya can hit it !

Offline teamnelson

  • Trade Count: (30)
  • Senior Member
  • *****
  • Posts: 4487
  • Gender: Male
The only DA revolver I don't have that I want is a 617 6" 10 shot, and once I had it, I'd probably let go of a few others before that one.

Whoever said the Model 10 w/4" heavy barrel and ramp sight was onto something too. I've got one, and I fall back in love with it everytime I pick it up.
held fast

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
TeamNelson they have been selling those ( police trade ins ) for anywhere from $187 to 239 around here . Some are well worn but most are OK . Some are m-10 others are 64's I wonder if a 187 price gun and a trip to S&W for a tune up would be cost effective.
If ya can see it ya can hit it !